Hey guys needing a turbo upgrade for C15 Accert SDP engine, Currently running B/W 550 hp wastegated turbo but it's to small. I no nothing about engines on the tech side other then there expensive lol
Looking for roughly 800hp turbo. I am running just over 600 RWHP according to the dyno with only roughly 26 pounds of boost
And should I go wastegate or non wastegate and what a/r?
Beem leaning towards b/w s410-sx
Thanks
Cat c15 Turbo upgrade
Discussion in 'Trucks [ Eighteen Wheelers ]' started by MSQUARED, May 10, 2021.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Well what you have for a motor would be a helluva start
MSQUARED Thanks this. -
-
Well is it an acert?
bridge motor?
6NZ? -
-
82mm Borg Warner in a 1.58 exhaust housing part number ends 0003. Its rated for what your looking for
MSQUARED Thanks this. -
Just curious tho waste gate or no? -
Not wise to go bigger than stock unless you do injectors and everything else to support bigger. I learned the hard way. Sure you will get more boost and you wont even feel an increase when you hit that boost. All you will feel is a complete turd of a truck becuase it takes forever to spool up. If your motor is all stock, stay with the cat turbo size.
swaan Thanks this. -
-
Don’t be hung up on the boost number,
you will have to buy an exhaust housing with the 0003. The 1.65 it comes with is not gonna work well with your setup.
To be clear he asked for a turbo in the 750 range I answered his question.swaan Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4