Big cam hg question

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Bias_racing, May 14, 2021.

  1. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
    I also have a trans question. The truck not.. nvr mnd.

    It has a 13spd road ranger. But it goes under drive when the splitter is used. Is there a way to convert that so that it splits up?
     
    Coffey Thanks this.
  4. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
    Done
     
  5. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
    Yeh I had it washed twice. There may bee some from up top near the rocking box or whatever unless that dribbles down it does appear to come from the hg
     
  6. RocketScott

    RocketScott Medium Load Member

    562
    892
    Apr 10, 2013
    Kentucky
    0
    The crossover tubes are a good spot to check too
     
    Diesel Dave and Bias_racing Thank this.
  7. little cat 500

    little cat 500 Road Train Member

    1,949
    1,004
    Jan 17, 2010
    Abbottstown PA
    0
    Looks more like injector slobber and sounds like a injector problem as well
     
  8. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
    Ill have to research swapping injectors. Id guess removing vc and an oring and gasket kit at least. Any injectors better than others?
     
  9. Diesel Dave

    Diesel Dave Last Few of the OUTLAWS

    7,123
    13,746
    Jan 20, 2010
    Hesperia, Ca.
    0
    @RocketScott hit it right, when I had my BC 1, it leaked like you described, it was the o-rings from the cross over tubes on the head. Simple fixed but extremely tight area to work on. Regarding injectors, mine had top stops, they where backed off. I found a reliable shop that knew how to flow the injector for Cummins, I would search for a local reputable shop close to you. Might as well have them go thru the fuel pump also to have them match the injectors. ####….. miss the good ole days when you mess with those mechanical engines. Im sure it’s still done but not here in Commiefornia.
     
    Coffey Thanks this.
  10. Bias_racing

    Bias_racing Light Load Member

    91
    55
    Aug 4, 2019
    0
    Man I dont know how you do it there! I wouldn't touch CA in my rig.

    Im capable of a lot of work, some stuff i farm out. This guys been ok, but im always leary of 1. Inexperience, 2 trying to make extra dollars doing something that doesn't need it. Lole the trans, its a 13 underdrive. Ive asked if it can be made to be od, or perhaps just another trans. He swears its broken. Im like ‍♂️smh. Nm.
     
    Diesel Dave Thanks this.
  11. w9l

    w9l Medium Load Member

    316
    513
    Oct 12, 2013
    0
    Nice flat glass...
     
    OLDSKOOLERnWV and Bias_racing Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.