Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Anybody replace trailer wheel studs?

Discussion in 'Ask An Owner Operator' started by zaroba, Aug 12, 2021.

Page 2 of 2
  1. Aug 17, 2021 #11
    Capacity

    Capacity Road Train Member

    1,499
    3,116
    Jul 28, 2019
    Neenah Wi
    0
    Yes we always did on our showagons , that's running 17.5s for rubber , clients were pretty anal about there trailers.
     
    Capacity, Aug 17, 2021
    Capacity, Aug 17, 2021
    #11
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Aug 17, 2021 #11
    Magoo1968

    Magoo1968 Road Train Member

    2,032
    5,426
    Mar 18, 2021
    St Malo mb
    0
    Just use a plastic spacer between or they corrode fast
     
    Magoo1968, Aug 17, 2021
    Magoo1968, Aug 17, 2021
    #11
  4. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  5. Sep 1, 2021 #12
    feldsforever

    feldsforever Road Train Member

    1,453
    1,440
    Nov 22, 2019
    0
    I've done a couple on a few cars and and pick up trucks. Whish I new the ice trick.
    To the op. When pulling the new bolt thru use a open ended nut. If you don't and its not straight you'll be mad and still have to buy a new new threaded bolt.
     
    feldsforever, Sep 1, 2021
    feldsforever, Sep 1, 2021
    #12
  6. Sep 10, 2021 #13
    zaroba

    zaroba Heavy Load Member

    840
    1,269
    Aug 28, 2012
    South East PA
    0
    Couple...hmm... finally have a chance to do a test putting my aluminum drives on the trailer and the studs stick out maybe 1 millimeter from the lugs, not fully torqued.

    20210910_111839.jpg
     
    zaroba, Sep 10, 2021
    zaroba, Sep 10, 2021
    #13
  7. Sep 10, 2021 #14
    AModelCat

    AModelCat Road Train Member

    29,140
    158,345
    Jul 7, 2015
    Canuckistan
    0
    I'm pretty sure that as long as there's at least 1 thread fully exposed its ok.
     
    AModelCat, Sep 10, 2021
    AModelCat, Sep 10, 2021
    #14
  9. Sep 10, 2021 #15
    Magoo1968

    Magoo1968 Road Train Member

    2,032
    5,426
    Mar 18, 2021
    St Malo mb
    0
    Dot loves oil leaks
     
    Magoo1968, Sep 10, 2021
    Magoo1968, Sep 10, 2021
    #15
  10. Sep 10, 2021 #16
    zaroba

    zaroba Heavy Load Member

    840
    1,269
    Aug 28, 2012
    South East PA
    0
    They don't care as long as it isn't dripping.

    And if you look closely, you can sorta see the oil level in the hub just below the half way point. For reference to the speed of the leak, I bought the trailer in Feb and have yet to add any hub oil.
     
    zaroba, Sep 10, 2021
    zaroba, Sep 10, 2021
    #16
  11. Sep 11, 2021 #17
    snowwy

    snowwy Road Train Member

    20,537
    13,274
    Jul 6, 2009
    0
    Some wd and those are pretty easy.
     
    snowwy, Sep 11, 2021
    snowwy, Sep 11, 2021
    #17
    feldsforever Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 2 of 2