From my understanding, a Non-CDL truck can weigh up to 26,000 pounds. That means if it's exactly at 26,000, that's the maximum weight of a vehicle that you can drive without a CDL (anything beyond that will require a Class A or Class B). Strangely, I just found out that Non-CDL drivers do not need an Air Brakes endorsement, which is weird (in my opinion, they should require it regardless if the truck isn't over 26,001 pounds because a vehicle with Air Brakes takes longer to stop than a vehicle without Air Brakes).
But in terms of controls and turns, are both trucks are pretty much the same? No differences?
Difference between a CDL and Non-CDL Box Truck besides the GVWR?
Discussion in 'Questions From New Drivers' started by Zan1995, May 26, 2022.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I would love to see an example of a vehicle with a GVWR of exactly 26,000. In my 64 years, I have never seen one. I am not an expert on truck classes, but I don't think there are any tractor-trailer rigs using class 5 or below trucks. So in essence we are discussing class 6 through 8 trucks. Maybe @ZVar can help me explain this better, but even with a class 6 truck GVWR 19,501 - 26000 you need to also take into account the total weight of the vehicle. Also on that air brake thing. Again maybe @ZVar can help, but that is a restriction removal NOT an endorsement. I don't see Air Brakes listed anywhere in 383.93. Based on what I have read if a person is driving a CDL-required vehicle and that vehicle has air bakes you MUST not have an air brake restriction. Remember what defines a CDL. Anything over 26,001, more than 16 passengers, or anything with placarded hazmat. I have seen some of the last two CDL-required vehicles that did not have air brakes. These vehicles can be legally driven with that air brake restriction. It's confusing I know.
Zan1995 Thanks this. -
Never mind, ignore it.
-
You NEVER go by what's on the door. You go by what the maker put on the tag inside the door.
Flat Earth Trucker, tscottme, Bean Jr. and 1 other person Thank this. -
We just put a 25,999 gvwr box truck in service this week, with air brakes. Non-cdl, so he’s driving an air brake truck without taking an air brake test. I just went through basic air brake safety with the driver, leak test, valve test, brake slack measurements, auto slacks, etc. He’s good to go.
Not sure what the question is, however.Bean Jr. Thanks this. -
God prefers Diesels Thanks this.
-
Flat Earth Trucker, wis bang and tscottme Thank this.
-
I wonder if the OP is only looking at stopping distances and not taking into account the weight difference? 80000 pounds of air braked semi is never going to stop as quick as a Honda Accord from the same speed in the same conditions
-
This hydraulic brake v air brake thing has always made me smile a bit. As a vehicle get larger it gets heavier and the breaking area is always going to get larger. At some point, the braking action required will be greater than the ability of a human to force the braking action. Take something like a 747. The pilots don't have the physical strength to move the control surfaces. This is why they use hydraulics powered by pumps to provide that power. You could use a hydraulic pump on a commercial vehicle I guess, but using compressed air is better. I would make some changes to part 383 if it were up to me to decide. Actually, if it were up to me I would add a 4th requirement for a CDL being ANY vehicle that uses air brakes and add the air brake questions to the general knowledge test every CDL holder must pass. But, that's me.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.