Can anyone advise or send me in the direction to find one of thease ends.
It's for a ramp on a enclosed race car trailer that over the years has been modified and Frankensteined....
It's aluminum on a aluminum hydraulic ram for the back ramp....
Any help appreciated
Thredded hydraulic ram end
Discussion in 'Car Hauler and Auto Carrier Trucking Forum' started by earnies2, Jul 9, 2022.
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You might call these people and give them the dimensions. The threads are longer than the standard caps I have seen but they may point you in the right direction. Does it have a number stamped on it?
Last edited: Jul 9, 2022
-
Cf bender might carry something that will work.
earnies2 Thanks this. -
Banker Thanks this.
-
Someone also susjested that whare it's a aluminum piston that it could of came from a car trailer. When it threads into the piston its flush with the rod. -
-
If it's off a race car hauler RUPW can point you in the right direction,if they don't have any on hand.
Racers Used Parts Wharehouse in Central PA. -
Machine shop could probably reproduce the part if you can't find a replacement.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.