I have a 2015 tripac evolution.. Control panel works - go to start it up, the buzzer and fuel pump go to prime to start and about the time the starter goes to fire off - it shuts down and throws an alt code with red triangle...
I am completely lost with this.. Maybe a bad ground to starter ? I have changed alternators multiple times. Tried 120 amp, tried 65 amp...65 amp is what came off and the one i have in there now. Checked all fuses, all are good.. Have 12.6 volts to sense wire on plug as well as same voltage inside the box... I have plugged into my laptop and it wont show any codes...
Anybody have any idea where i should start
Tripac apu alt code no start
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by D.Tibbitt, Oct 24, 2022.
Page 1 of 7
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
@reeferwrencher do u know anything about tripacs ?
-
Best option set it on fire and get something else lol......tripacs are absolute junk. That said from experince one of two things are happening here. Either A and most likely is the computer is not reading any signal from the alt and thinks its bad in which case you need to check wires, belt and so on....or B and as happened in mine the new alt caused the computer to cook and get ready to pay $7500
-
-
-
Siinman Thanks this.
-
-
D.Tibbitt Thanks this.
-
Sounds like a major power drop. Need to check voltage at the main power for the board,batteries and starter.
Does it have the 50 amp fuse close to the starter?D.Tibbitt Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 7