That is pretty good. With the 3.42 RAR I assume It is a manual? What kind of RPMS are you getting at 65 with that set up? I like to learn on these set ups on all brands. Really helps me understand what engines are doing these days in the market.
Flow Below Added
Discussion in 'Ask An Owner Operator' started by Siinman, Jun 13, 2022.
Page 30 of 91
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
It's just under or right at 1300
Blackie II was 455HP with 3.58 / 10SPD and much friendlier. Didn't have the big aero fins or skirts though.
Casper was 7.2 lifetime ( 300K miles my driving) @ 62mph / 1400 rpm / 3.55 / 10 spd also with smaller fins and skirts with the ISX 15 / 450HPSiinman Thanks this. -
Work 5, off 2, none are going to cut into the time off so it's the speed limit everywhere.Siinman and Dave_in_AZ Thank this. -
Siinman Thanks this.
-
All my trucks had APU's as well, fully functional, so there was nil idle time as well.
Siinman Thanks this. -
Best new ones i had were the 96-99 Century with Detroit/13spd Always in the 7's. Changing over from 379 Pete's that were always in the 5's-low 6's (except downhill with the key off)Siinman and Dave_in_AZ Thank this. -
Siinman Thanks this.
-
-
Magoo1968 Thanks this.
-
Forgot to add that trip was 7.3 MPG's and way to many miles. Had about 600 miles of deadhead as well. 400 was me saying f it and was gonna drive home from UT only to get caught in a big storm.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 30 of 91