This one came in at about 82500-83000
And I will tell you exactly what happened while I was at the dealership I loaded it myself of course and I was smart enough to raise the bed and probably dumped out you know a couple hundred gallons of water.
And quiet frankly after that fell out of it my brain just apparently stopped
Because I didn't get out of the machine to actually look in the bed.
Cuz if I had I would have seen the remnants that was in the bed and have them fire hose it out.
Cuz I ended up weighing it, then I stop somewhere else to try to get it axle out.
Finally I took a second look at that bed and realize there was at least a ton worth of sediment and dirt and various stuff possibly more and I was not going to get it out with a shovel and by raising the bed which is when I went in to figure out how to get it to axle out anyway i
Big Loads - Post Photos Number 2
Discussion in 'Heavy Haul Trucking Forum' started by truckdad, Aug 3, 2015.
Page 822 of 932
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Phoenix Heavy Haul, FerrissWheel, beastr123 and 7 others Thank this.
-
745 I have a bunch of room… an A60 however….
Phoenix Heavy Haul, Rugerfan, nikmirbre and 9 others Thank this. -
FerrissWheel, cke, CAXPT and 1 other person Thank this.
-
cke, FerrissWheel, CAXPT and 1 other person Thank this.
-
First load out of the house, arrive hydraulics don't work spend a few hours on site mechanic fixes it, we are in business
placed the main deck outriggers perfect spot for a 150,,,,,, only this was a 16m so oops. at least one of the tires was on there good. For a few reasons I didn't want to take it back down for that.
Always a nice eye squinty moment going over the tires.
And the camber on this thing was wore out we played with adjusting it there for a minute and realize no the whole thing is just sloppy and worn out. Cuz I mean we try to adjusting the camber with the hydraulics but especially that left tire that left steer tire on that grader it just kept kind of wobbling, which made it real fun with about only six inches or so of rubber on the steel. Either side. So with as much slop we were getting out of the front end and we got it up on there straight very painstakingly yeah she ain't coming off till she gets delivered.
And then almost done for the day pulling to park up,,,, trailer bag decided it had done enough. We have one of those on the way.
God prefers Diesels, cke, nikmirbre and 10 others Thank this. -
A little building to a factory dairy in Western Ohio. I hate these places, I may be in jail tomorrow for letting all the cows out to go to pasture.
God prefers Diesels, cke, nikmirbre and 11 others Thank this. -
In Ebenburg Pa with another building. These are getting to be a thing….
God prefers Diesels, cke, nikmirbre and 12 others Thank this. -
My almost 17’ wide one from this week.
Now I have hit my head - I am going to places I never go via places I know better than to go through!
I need a route to New Jersey from Iowa next week 92’ long 15’ 8” wide and 14’ 11”God prefers Diesels, cke, FerrissWheel and 12 others Thank this. -
cke, FerrissWheel, dwells40 and 4 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 822 of 932