Post flatbed load photos here V2.0
Discussion in 'Flatbed Trucking Forum' started by leftlanetruckin, Feb 18, 2014.
Page 2527 of 2732
-
booley, Kyle G., exhausted379 and 6 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Got out there and all it was was blowing sand and nowhere to turn around. But hey, like you said, I took them to the woodshed. got 5.34 a mile out of them going the direction I was headed anyway.Kyle G., exhausted379, CAXPT and 12 others Thank this. -
One set up is a straight truck with a lift, then a pup behind that. The rear trailer has more like a stinger/crotch tongue connection, not a dolly. They run a lot of pallet products on these.
Know a few of the drivers over there, I’ll see if I can get a few pictures.Last edited: Oct 26, 2024
-
booley, Kyle G., exhausted379 and 7 others Thank this.
-
booley, Kyle G., exhausted379 and 6 others Thank this.
-
i’ve seen those as well, difference being the frame length behind the axles is equivalent on a tractor and a dump truck, and it’s not on what I would use for a flatbed with a moffett/
tagalong trailer will be working with the new unit -
We get into some….interesting places.
Its length, and the fact that I’ve lowered the frontend almost a foot since I bought it keeps a feller on the edge of his seat, with both eyes wide open to keep from tearing stuff up routinely. -
-
These have like a 28 foot bed on a tandem axle unit. The donkey sits in the middle of the set. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2527 of 2732