I was doing some further reading, and apparently there are restrictions on minimum number axles required to shunt the signals on some systems. So it may work, or it may not.
https://www.reddit.com/r/railroading/s/cMtxn6Vh3w
Train derails after striking oversize load
Discussion in 'Trucking Accidents' started by Hammer166, Dec 19, 2024.
Page 4 of 7
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
My question is, if this was a load requiring a permit, who is the clown that chose that route? Pretty obvious that that load should have been sent on a different route.
-
-
There is no other route for them to take. US285 is the only route they could use.
-
I read the trucking co is possibly voss transport or transportation…
-
-
-
NTSB releases preliminary report following Pecos train crash
Data from one of the recorders showed that the train was moving at 68 mph and emergency braking was activated prior to impact!drvrtech77 Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 7