####, I must be confused then. That time the guy lost the aluminum ladder in front of me in I 294, dropping it right in the path of my tires and I swerved I must have been somewhere else. Or maybe because I had enough time to avoid it without doing attempting a hard brake I wasn't following him close enough. Sorry, but each situation is different and the word never doesn't accommodate them all.
Should we just give up?
Discussion in 'Questions From New Drivers' started by JenLaw84, Aug 27, 2010.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
done...........!!!!!!! -
a "sudden change in direction" can get you rolled over........going straight.......not even on an exit ramp at high speeds.........
i'm glad you're canadian......stay up there and drive your way......... -
Don't worry, I'm looking far ahead. I also leave more space than most people. That doesn't change the fact that sometimes things happen. For the most part I would say don't swerve but to say never is just silly. We must have very different ideas of what that word means.
BTW, I spend a lot of time driving in your great Country. -
I wish I thought of "BFI"!
I hope a lot of new guys get to read this thread!
-
To the OP. Don't give up. Lots of drivers, new and experienced, have rolled a truck and been able to remain employed. Hubby might have to go with one of those real bottom feeder companies that has 10 crappy trucks, but don't give up.JenLaw84 Thanks this. -
It's not a good situation but I agree you shouldn't give up. It might be slim pickings but you may be able to find a company that will hire you. Maybe a local outfit.
I would say next time just grip the steering and plow on through. Sounds cold but that's probably your safest bet.JenLaw84 Thanks this. -
Thanks for all your input and not getting too bashy. It was a mistake we now know we should of hit it but of course if we all had hindsight crap like this wouldn't happen. I know it's going on the DAC/CSA and that will scar him for quite sometime. He was carrying 41,000lbs of totes & barrels of paint he thought he would be able to use the shoulder to avoid instead of slamming on the brakes and possibly the load shifting forward. Obviously it backfired and he should of hit the mofo as safety called it as they let him go which I understand completely the damage from hitting it would of been far less.
Any ideas where I can find these feeder companies?Last edited: Aug 27, 2010
-
CRST http://www.crstvanex.com/
CR ENGLAND
http://www.crengland.com/truckingjobs/index.jsp
PRIME
http://primeinc.com/
JB HUNT (POSSIBLE)
http://www.bubbajunk.com/articles/JB_Company_Drivers.htm
SWIFT
http://www.swifttrans.com/
mAYBE TRY THESE BUT BEWARE THEY ALL SUCKJenLaw84 Thanks this. -
Thanks JabberJaws we'll look into these & apply I know CRST last time we applied when he left USA because of crap miles they were just doing L/O which I'm pretty sure we want to stay away from for the time being since we are still fresh in the game
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4