how are the loads to the midwest from pa---if you lived in oh/pa area would you be in a decent area for good loads and home time??
Schneider Choice Program
Discussion in 'Schneider' started by Desperado, Nov 27, 2008.
Page 21 of 65
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Most loads go to Berwick, Carlisle, and Tobyhanna (sp?)canuck in da truck Thanks this. -
If your truck gets descent MPG then it's not a bad gig. Just have to learn how to work the load board and know where to and not to go. -
I've gotten my fuel avg from 5.8 to now avg 7.5mpg and thats pulling 42-44lbs in a reefer. Slowed my butt down to 58mph got the turbo3000 and got decent tires. Switched over to the Michelin xone xda energy.
-
Thats remarkable! What does the turbo3000 do? I've heard people say they've added it with no results.
What kind of truck do you have? -
I pencil out every tank of fuel so I keep very close track of my fuel mileage and added one thing at a time.. I've found with the turbo 3000 that if I go 65mph it doesn't work properly, but at slower speeds it does what it's supposed to. I have a 2006 Volvo 670 with the Volvo d12 engine.
SHC and Travelinman Thank this. -
SHC Thanks this.
-
that thing is the biggest scam on the market. LMFAO...
-
-
It may not work on all trucks but it did mine.. I did measure going 58 before and after it's install. If it didn't work I would of taken it off and got A refund. I'm happy with it so I guess that's all that matters. My fuel went up 0.50 mpg with it. Every little bit helps to be profitable! Back on topic though is the choice board pretty consistent and are you guys happy with it? Looking at coming on board.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 21 of 65