Make sure you remember the model number of your parrot for when the batteries go bad. Cheaper to order a new set of batteries, than to buy a new headset. Different models DO NOT use the same batt.
Just curious, anybody else having problems with their phone and headset losing connection after awhile?
My Experience with Lone Star Transportation
Discussion in 'Motor Carrier Questions - The Inside Scoop' started by American-Trucker, Dec 1, 2011.
Page 73 of 241
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
yeah mine would lose connection and lost the ability to answer by pushing button on headset, i could connect but had to dial number as it also lost voice dial. got a new one and solvedit. had it for a yearbefore it started that. would new batteries fix that?
-
nah i pull into the loves at the 89 (christiana) just as my 14 ran out. Good meetin ya too, thanks again for the help.
American Trucker -
Got to the receiver at 115pm today, took 2.25 HOURS to, remove/fold my tarps, take off and put away all the chains/binders/straps! lol
Then i headed southish about 45 min to the Pilot on 57 just south of 80 in IL
I have to load some pipe tomorrow about 2 hours south at 8am. I need dunage....couldnt find a homedepot or lowes to save my life. Call shipper and ask if they have any i can buy or if they supply it....she says "i think so...we sure buy a lot of it" (insert Beach slap smiley here)
and she also said after i asked, that there is a lumber yard in town as well....
they better have 4x4s.....lol
Im exhausted!
American TruckerThe Challenger, alex94 and Wedge Thank this. -
yup putting away equipment is time consuming, you'll get faster as time goes on. Anyway I got a load from AZ to CT. Picks up Thursday. Copper.
-
i found me a Home Depot in Champaign, IL that opens at 6am, so i'm just going to avoid any issues by stopping there...i think again they only have Pine
I HATE home depot....i might just flip a coin on this one....I sware if i go out of my way, spend $60 on wood and they wont use it.....lol. The only hardwood they have is 1x1's WTF! lol
American Trucker -
be carefull going up to the copper mine, and what ever you do DONT pass there exit/rd you do NOT want to get stuck up there with a big truck (its restricted anything over 26' if i remember right.) Going up MT is easy...comeing back down heavy sucks lol. at least you can skip the NM scale by going to the pilot to scale though lol
American Trucker -
-
Eeeeww, are you getting those bags of ore from south of Phx? Hated that place. Hated the little "class" I had to take when I checked in. Hated the pissy attitude of the dude on the fork (the lady on the fork was absolutely kewl. Actually spoke to me like a human being). Hated those bags that wanted to come open too. I ended up tarping them even though it wasn't required.
I only took mine over to Riverside, CA though. Weight wasn't too much of an issue. -
Jarhed1964 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 73 of 241