When LTM are available you will get an annoucement on the Dock. If you got a 720, then you got the latest maps available.
Thanks,
Mark
Suppport Thread for the TND 500, TND 700 or future Rand McNally products.
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Apr 16, 2010.
- Thread Status:
- Not open for further replies.
Page 417 of 756
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Mark, after mine was done charging, it said there was map updates and software updates too. I did both.
-
I thought I had seen the 720 has a better power port.well I got one and its still a freaking USB..do I need to return it or are they somehow better This time.?
SavageSam Thanks this. -
is there a fix for the power connection, this is the second time that my connection has become loose and that I am unable to charge the unit, the first time they sent a refurbished unit but now its been a year since i purchased the unit, 6 mos since the replacement was sent. I have no pressure on the cord as I wrap it around the base several times, run about 12 inches from that to the unit and I don't keep anything on my dash so I don't know how to keep this from happening. I do unplug it weekly to take home/update. At a loss on what to do.
SavageSam Thanks this. -
I have to admit. I'm as nervous as a L O N G tailed cat at a rocking chair convention because that was what killed my Garmin. That type of power port needs to go. I do the same thing as far as making sure there is NO WAY the outlet/cord will ever get tugged on. I have mine looped through the mount bracket so if the cord get yanked it stops at the bracket and not the USB. I think the USB should be for the updates etc. Maybe a mini phono click in type plug for the power or better yet make the DC connection permanent.
-
HI Mark,
I just receive my Lifetime Maps for the TND 710, I insert the micros SD Card and I get an Error message saying ( NAVILUPDATEFILE.TXT ) Update Failed, On top of all that, very small micro print ( updating please wait.... ) So is it working or lock up ! -
Why does the 510 no longer give the notice of a weigh station approaching? This starting happening to a friend of mine after the last update
-
I bought a 720 three days ago. It worked fine the first day. The second day it started only displaying the north up view when the turn was far away. I have to wait until the range is very short, under 50 miles say, then actually place it in north view for a few minutes then I can switch back to 3D view. Is this a software problem or is my unit defective? It also stopped giving the audio warning for speed at about the same time.
Is anyone else having issues like this? -
You tell it whether you want it to automatically zoom way out to the next turn and automatically zoom in slowly. If you are in the 3D view and you zoom out far enough either manually or with the "auto zoom" feature turned on, it will switch to 2D view until you zoom back into the 3D view threshold.
Also, the "North Up, Heading up, or 3D views are selectable by pressing the direction of travel (N, S, E, W) button just to the left of the Main Menu button in the lower right corner of the navigation screen.
This and about 100 other features are shown in the full user guide here: http://www.randmcnally.com/support/documents/tridion/pdf/TND_720_User_Manual_HR.pdfSavageSam and Mark Kling Thank this. -
SavageSam Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 417 of 756
- Thread Status:
- Not open for further replies.