Millis chat room
Discussion in 'Millis' started by Sully72, Feb 20, 2011.
Page 339 of 452
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I had the shuttle pick me up at K W but figured I need the exercise so walked to diner they definitely have good food would recommend it to anyone
-
Are you sure you don't have your ignition timer set. A buddy of mine was at KW in Oak Creek today for the same recall and they didn't do anything of the sort to his. -
Im not buying it either. If millis starts taking steps into a direction of a cdl mill like company. Ill be applying to Abilene after my 18-24 months is up. As of now i have alot of faith in Millis and want to remain employed here.
-
MTownZ Thanks this.
-
-
Rumors are not a good thing, say it ain't so. Cameras and now? Not good!
Sent from my RM-845_nam_vzw_100 using Board Express -
sorry was driving all day. the mechanic at wisconsin kenworth said millis is turning off the ide timers. this means no idle. my truck stays idling for about 2 minutes unless i rev the engine.
-
make that 3 min. i just timed it. doesnt matter how hogh the ignition timer is set to. after 2 min it jumps to zero then another minute and shuts off.
-
With out the ability to idle in the summer, the inside of the truck will easily reach 100+ degrees for daysleepers. I sorry, but I'm not believing this till I hear from multiple sources. It's extremely unsafe and they will be losing drivers to heat related illnesses left and right.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 339 of 452