yes sir im sure. hooked them up one at a time. not solid wire. stranded. im guessing my run is 6-8 feet being my batteries are at back of truck.
power inverter keeps shutting off
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by freddyb, May 13, 2014.
Page 4 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
and at back of inverter. it doesn't have where u just plug wires right in so they are connected same as on batteries
-
Does the inverter work with anything else???
It could be bad...but
I think it's too small to power the micro on initial start up,since you said it worked with the Cobra...
The cables look too small to me..
I only use 00 welding cable for wiring inverters. -
-
the cobra I used it with was also a 1500watt inverter. never had any problems with the cobra. and why wld the ovp come on instead of the low voltage. and also I watched a video on youtube of the same inverter I have and it was powering microwave and fridge at same time so idk. puzzles me
and im using 4ga wires. I think that's whats recommended. welding cables not easy to find -
-
ok just bought the cobra cpi1575. works great!
-
guess the power drive 1500 was bad bc im using same cables and all with the cobra and it works fine. what size inline fuse do I need?
-
-
ok well explain why my buddy has the same power drive set up and could run his 700w microwave
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5