Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

1996 Volvo D12 wia

Discussion in 'Volvo Forum' started by aron12, Apr 2, 2015.

Page 5 of 33
  1. May 14, 2015 #41
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    why did u get new ECM? old is faulty?
     
    Pablo-UA, May 14, 2015
    Pablo-UA, May 14, 2015
    #41
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 14, 2015 #42
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    Wires are 196b and c I believe for that relay
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #42
  4. May 14, 2015 #43
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    Not sure, coding looks like it is not Volvo, It is Wight GMC truck with Volvo Engine.

    Trace wires to EB connector to be sure
     
    Pablo-UA, May 14, 2015
    Pablo-UA, May 14, 2015
    #43
  5. May 14, 2015 #44
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    Volvo said the old one was faulty , sent it off for repair was told the board was bad and they couldn't fix it. So $2000 and a month wait for back order and still didn't run. Volvo charged me for 37 hours labor only and told me the ecm was bad .$1370 bill for nothing!
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #44
  7. May 14, 2015 #45
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    Ok, lets start this one. After that we will think how to fix yours.

    If all power contacts are hot - bleed cylinder head fuel passages and try to start
     
    Pablo-UA, May 14, 2015
    Pablo-UA, May 14, 2015
    #45
  8. May 14, 2015 #46
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    Will do , it's 4:30am here . As soon as I get the psr I'm going to work on it .
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #46
  9. May 14, 2015 #47
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    Thank you for all the assistance
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #47
  10. May 14, 2015 #48
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    to bleed fuel passages - unscrew bleeder valve in front of head with 11 mm socket and use prime pump till u see no air bublles. Close the valve and try to start/
     
    Pablo-UA, May 14, 2015
    Pablo-UA, May 14, 2015
    #48
  11. May 14, 2015 #49
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    I've done both already several times , at filter and head .
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #49
  12. May 14, 2015 #50
    aron12

    aron12 Light Load Member

    189
    10
    Apr 2, 2015
    Centralia , il
    0
    I'll try all today when I get there .
     
    aron12, May 14, 2015
    aron12, May 14, 2015
    #50
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 5 of 33