1996 Volvo D12 wia
Discussion in 'Volvo Forum' started by aron12, Apr 2, 2015.
Page 28 of 33
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Ignition off 12 volts at EB pin 3
Ignition on 12 volts at pins 3 , 4 ,6
Nothing on pin 29 , not a good ground ,I voltage , pin 30 good ground on EB plugAttached Files:
-
-
-
Are you sure your new ECM is programmed ?
Ben -
IMO, ECM is programmed for Bosch injectors
This truck got lucas injectors..CellNet Thanks this. -
Primed engine , woukd not start, all rear lighting wires bad, bare, ground broke. Not sure if it would cause issues but will rewire that next. Dell b630 on the way, xp pro system , long range antenna for better wifi reception when we are ready.
-
When the system arrives I would definately appreciate yo walking me through the right vcad install.
-
Ecm was programmed to my vin , by volvo , for lucas injectors, ecm is brand new.
benglebrick Thanks this. -
so all goes wierd
-
I checked specifically with dealer on the programming and they stated it was programmed for lucas ?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 28 of 33