I saw some that were rated 12k,.. they showed a picture of a school bus on a wheel lift behind a wrecker.
The ones I have now are starting to show their age. I'll probably have a new set by next summer.
Hurst
Stepdeck or flatbed auto hauling
Discussion in 'Flatbed Trucking Forum' started by southbaydad, Dec 19, 2015.
Page 3 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Hurst Thanks this.
-
When I first got the trailer I would never dream of putting tracked equipment on it for fear of damaging the deck or ramps. I tried a smaller 120 excavator first. Then a few D3, 450, D5 machines,.. again,.. nothing. I was hesitant to do the D61. Was supposed to be only 40k. After scaling,.. it was actually closer to 43k lbs. They paid $4.15 mi from Meridian, MS to Littleton, NC and loaded from the same exact Komatsu dealer I had just delivered a D31 from Texas to. 0mi deadhead. So um,.. yeah.
Not only that,.. but they had problems with that D61,.. 3 days later I took it back to Meridian and switched with another D61 and took that one back to Littleton. If I remember correctly the D31 paid over $3 mi from just outside Houston to Meridian. That was one of my best grossing weeks and ended up working with that broker doing other equipment till my truck went down in April,.. never got a call back,.. seems they dont like to hear no I cant do it, my truck is in the shop.
Been a very good trailer. I have the HD Ramps. They are rated 23,500 lbs each piece. So they are supposed to have a 47k working limit. More than I would ever put on my trailer.
Hurstsouthbaydad, TaylorMade407 and 281ric Thank this. -
Anyone ever use this lasso type of strap - they seem pretty versatile but not really a "net" that goes over the tire to hold the strap up but not sure if that matters or not?
Attached Files:
-
-
Wish I had taken some pictures of when I had done it. Sorry, but I do not. But if in a pinch you can use your straps for the same usage if chains are not an option.
HurstDrDieselUSA and southbaydad Thank this. -
southbaydad Thanks this.
-
Ya i guess I can see how that would happen with only the one side mount -
I have thought about that also or running a 2" and doing the same. I would rather be "doing it right" sometimes the "do what I can make work" style of doing things drives me crazy -
https://www.autohaulersupply.com/
I've bought from here in the past. They seem to have just about anything you could need.southbaydad Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 5