Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Jul 7, 2014.

Thread Status:
Not open for further replies.
  1. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0

    These issues have been resolved... In RM QA now.

    Thanks,
    Mark
     
    freight shaker Thanks this.
  2. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0
    On the 510 as you put the card in make sure it goes in the SD card slot.

    A 4gb will not work. 8/16gb, class 10, not Ultra/Ultra Plus. HC cards are also on the do not use list.

    Newegg and other companies sell them for about $10. You can post a link to the one you think you might by.

    The reason you cannot use the other cards is due to the way they read/write data on the storage medium. They are not in the same format as the lower type of SD Cards.

    Thanks,
    mark
     
  3. freight shaker

    freight shaker Light Load Member

    Joined:
    Dec 14, 2010
    Messages:
    238
    Thanks Received:
    227
    Location:
    Northern Illinois
    0
    Rand McNally pushed these through pretty quick. I downloaded the update this morning and it solved the lagging issue. It seems to be running good right now. Thanks Mark!

    Edit/update- After entering new addresses into the unit the lagging issue is solved... still locks up quite often though. Any ideas?
     
    Last edited: Feb 22, 2016
  4. freight shaker

    freight shaker Light Load Member

    Joined:
    Dec 14, 2010
    Messages:
    238
    Thanks Received:
    227
    Location:
    Northern Illinois
    0
    Mark,
    The locking up issue seems to be getting worse on this unit. Getting vertical line of dots on the screen when it locks up.
    20160223_081638.jpg
     
  5. jimjam38

    jimjam38 Medium Load Member

    Joined:
    Nov 6, 2011
    Messages:
    458
    Thanks Received:
    73
    Location:
    chickasha, oklahoma
    0
    Seen this thread and figured what better place to ask. I seen the new tnd 80. Other than the price and fancy magnetic base, any major differences between it and the 70? Looking to get rid of this cobra 5400 pro.
     
  6. Corporal_Clegg

    Corporal_Clegg Road Train Member

    Joined:
    Oct 9, 2010
    Messages:
    1,239
    Thanks Received:
    605
    Location:
    Raleigh,NC
    0
    Any word from Rand?
     
  7. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0

    If I remember if no way to get you turned around it will force a U-Turn.. any examples?

    Thanks,
    Mark
     
  8. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0
    Restriction was missing. It has been added for future updates.

    Thanks,
    mark
     
  9. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0

    I think just the size. I have not seen the TNDD70 yet.. Have you looked at the specs on the RM website?

    Thanks,
    Mark
     
  10. Mark Kling

    Mark Kling Technology Contributor

    Joined:
    Sep 23, 2007
    Messages:
    10,935
    Thanks Received:
    4,216
    Location:
    Statesville, NC
    0
    Send me your logs.. Not sure why you would still have lock ups if I set you on the Beta Version....

    We need to pursue this more.

    Thanks,
    Mark
     
Thread Status:
Not open for further replies.