Big Loads - Post Photos Number 2

Either way we might still have a load securement issue.

 

Indeed.

 

That must be an old pic.
That is an old Fld model.. no not me..
Never heard about that one.

 

On 19 axles as well ....

 

Nope look closer. Was a 2 3 2 trl

 

I could only see it on my phone

Looked like extra axles on front of dozer

 

I am on my phone as well lol

 

In the first picture, those pins were preventing the axle from opening a gap to put the shims. There are 2 sets of pins on top in the 1st pic, in the 2nd pic, I have the 2nd set of pins removed, which allowed the axle to separate.

 

The second pins in that first picture the rusty looking ones aren't supposed to be there. Someone stuck those in probably to stop the axle from gaping open and dropping the shims. Those are set up to flip the axle but not stick up above the trailer, my top pins stick up all the time and get in the way sometimes.

 

Excactly, there is only two pins per side. Not three.