Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Jul 7, 2014.

Thread Status:
Not open for further replies.
  1. Everett

    Everett Crusty Shorts, What???

    2,095
    6,400
    Oct 20, 2009
    Hampton,Ia
    0
    i have a year old rand 730, works great , last time to Fl and now back to Iowa, hasnt worked right, let me try to explain , ok, when i got to Fl to unload , it got 123 inside the truck, so im thinking it over heated it, the gps works fine except that one part were you zoom in and shows the miles and zoom in and can get real close so i can see the rest areas now it stuck out in 75 miles range , so i reset and few secs latter it goes back to 75 or 18 miles range, if i go closer the numbers go blank , never done that before, so when i stop for tonight , i update with no change, are they having issues with the sat alights or did my truck ruin it by overheating thanks in advance, ps i couldnt find any settings for that.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,212
    Sep 23, 2007
    Statesville, NC
    0
    Under preferences, map tab what is auto zoom set to?

    Thanks
    Mark
     
  4. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,212
    Sep 23, 2007
    Statesville, NC
    0
    I will check

    Thanks
    Mark
     
  5. billindelicato

    billindelicato Light Load Member

    109
    17
    Aug 24, 2015
    0
    Any word on the dock servers?
     
  6. Everett

    Everett Crusty Shorts, What???

    2,095
    6,400
    Oct 20, 2009
    Hampton,Ia
    0
    Map zoom shows two black lines now a plus sign and a neg sign ,even took it outside no change
     
  7. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,212
    Sep 23, 2007
    Statesville, NC
    0
    They were up last Friday. Have you tried yet?

    Thanks
    mark
     
  8. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,212
    Sep 23, 2007
    Statesville, NC
    0
    You are on 3d.

    Preferences/map. What is auto zoom set to?

    Thanks
    Msrk
     
  9. Everett

    Everett Crusty Shorts, What???

    2,095
    6,400
    Oct 20, 2009
    Hampton,Ia
    0
    i got it figure out i think, i wacth u tube and shows the heading, up or down page and was set in 3 d mode , went to head up mode now back to normal just a heads up for anybody else that goes threw this porblem yes Mark stupi me thanks for your help
     
  10. billindelicato

    billindelicato Light Load Member

    109
    17
    Aug 24, 2015
    0
    ok was able to connect and it performed a minimal update but no longer tells me new maps are available...
     
  11. mc2

    mc2 Bobtail Member

    23
    5
    Jun 30, 2007
    0
    I'm still getting no response on the TND 80 when I tell it to check for updates, and it's been that way for weeks. Does that have anything to do with the dock servers?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Thread Status:
    Not open for further replies.