I have a 2012 cascadia.when I took it in to get the bushings and alignment I had like 5 codes on along with both the check engine lights on.the mechanic said it happens sometimes when they lift truck .bs.codes are engine 2 position sensor 3 and 8 ,11 and 15 .can anyone help ?
HELP: Cascadia check engine lights
Discussion in 'Freightliner Forum' started by Rich_Trucking, Mar 25, 2013.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
can u tell code in SPN format?
-
Do u have ECAS suspention?
-
-
Soild yellow engine lamp is on after long uphill pull with heavy load . . Stays on for several days before going out . .Was told this is high compression lamp? What's the deal with it , and can I manually shut it off?
-
2013 Cascadia Evolution , fault 1-fail 7-spn 523318-sys25.. Solid Yellow Engine Lamp next to cruise button on.. Came on after long pull uphill with 44k load.. Any ideas.
-
-
question I have check engine light come on, no codes three computer checks later.. lose power still runs no acceleration, this is still happening after turbo, egr valve system .. all new hoses clamps .. whole system, air filter.new muffler..no exaust leaks.. each place has guess what it is thousands later, vpod working also, this thing is throwing no codes zero but goes along good about 45 minutes . turbo stops working speed drops to 45 to 55.. then all of a sudden shoots out like a rocket after hours of 45 to 55, no one can figure this out.. killing me.. help
-
Check battery cables/connections.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4