What's the relationship between dead key and full modulation assuming the modulation is at 100%? Two times the carrier? That's why never understand when people say they have a radio that dead keys 2 watts and it swings to 40 etc.
upgrading cobra 29 ltd classic
Discussion in 'CB Radio Forum' started by wannabnapete, Aug 19, 2010.
Page 7 of 7
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
BTShepp Thanks this.
-
-
-
-
Parked at the Loves in Oglesby IL ( I39 mm 54) turned on Cobra 29 chrome ltd ( 5watts pep 20 watts) asked for morning radio check got a reply from driver at the 66mm, again not trying to impress anyone just stating fact.
-
Upgrade your antenna and coax(lowest SWR you can get) before you upgrade radio. This will get you out further and you'll be able to hear better as well.
wolverine11 Thanks this. -
Well freebeertomorrow stated in his post that he had a Wilson 2000 antenna and decent coax, however he didnt say where his mounting position was, on what kind of truck, and what his swr was, so those factors may have influenced stock radio performance and if they are still the same will affect tx and rx of radio after supertune.
-
mirror mounted on a 14 mack pinnacle day cab. swr 1.2-1.5. i never cut the antenna to even it out. i used an astatic swr meter. surprisingly it was identical to what my radio said.
wolverine11 Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 7