Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Change door lock barrel

Discussion in 'Kenworth Forum' started by Ozdriver, Apr 20, 2017.

Page 1 of 4
  1. Apr 20, 2017 #1
    Ozdriver

    Ozdriver Heavy Load Member

    767
    1,390
    Oct 16, 2015
    Australia
    0
    Iv'e got a K100. When you put the key into the passenger door lock, it turns right around and nothing happens, in other words it's broken. I've bought the key and barrel kit off KW, 2 door barrels and the ignition switch barrel with 2 keys. I've changed them in the past, problem is I've forgotten how to change the door lock barrels.
    I remember you cut off the stainless cover over the lock, problem is I've forgotten where you go from there. You don't have to touch the interior trim.
    Couldn't find anything on google, and on TTS one guy removed part of the interior trim and I know you don't have to do that.
    Anyone know where I can find step by step instructions, preferably illustrated? Or can anyone explain it step by step?
     
    Ozdriver, Apr 20, 2017
    Ozdriver, Apr 20, 2017
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 20, 2017 #2
    noluck

    noluck Road Train Member

    1,616
    11,680
    Jun 10, 2011
    greenville,sc
    0
    I always pulled the door panel, I don't know for sure on a k100, but all the ones I changed have a retaining clip on the back side. Pop it off and pull the rod loose and it should come out of the front.
     
    noluck, Apr 20, 2017
    noluck, Apr 20, 2017
    #2
    Diesel Dave, mslashbar and Ozdriver Thank this.
  4. Apr 20, 2017 #3
    Ozdriver

    Ozdriver Heavy Load Member

    767
    1,390
    Oct 16, 2015
    Australia
    0
    I'll be looking at it tomorrow, but I know you can do it all from the outside because I've done it before. After you chisel the stainless cover off you somehow put a small blade down the side of the barrel and pull it out, but it escapes me how I did it exactly.
     
    Ozdriver, Apr 20, 2017
    Ozdriver, Apr 20, 2017
    #3
    noluck Thanks this.
  5. Apr 20, 2017 #4
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    You just wanting to change the tumbler barrel or the whole thing?
     
    Superhauler, Apr 20, 2017
    Superhauler, Apr 20, 2017
    #4
    Ozdriver Thanks this.
  7. Apr 20, 2017 #5
    Ozdriver

    Ozdriver Heavy Load Member

    767
    1,390
    Oct 16, 2015
    Australia
    0
    Just the tumbler barrel.
     
    Ozdriver, Apr 20, 2017
    Ozdriver, Apr 20, 2017
    #5
  8. Apr 20, 2017 #6
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    There is a certain position to turn it and it will pull right out. But I think you have to disconnect the lock linkage to do it.
     
    Superhauler, Apr 20, 2017
    Superhauler, Apr 20, 2017
    #6
    Ozdriver Thanks this.
  9. Apr 20, 2017 #7
    OLDSKOOLERnWV

    OLDSKOOLERnWV Captain Redbeard

    16,594
    246,073
    Nov 29, 2011
    West Virginia
    0
    I need to do the same thing on my 900, just put off buying a new one. Driver side barrel missing all together.
     
    OLDSKOOLERnWV, Apr 20, 2017
    OLDSKOOLERnWV, Apr 20, 2017
    #7
    Ozdriver Thanks this.
  10. Apr 20, 2017 #8
    bigguns

    bigguns Road Train Member

    2,846
    6,848
    Jun 13, 2013
    Omega,GA
    0
    Doesn't it just SUCK when you have done something and can't remember how you did it? I have that happen a lot lately.
     
    bigguns, Apr 20, 2017
    bigguns, Apr 20, 2017
    #8
    Mr Ed, Ozdriver, Diesel Dave and 3 others Thank this.
  11. Apr 20, 2017 #9
    clausland

    clausland Road Train Member

    1,933
    11,066
    Dec 5, 2014
    North Woods
    0
    I had the same problem with Pete, tried everything, took it to a locksmith, he had the tools to swap it out quickly, charged me $10...
     
    clausland, Apr 20, 2017
    clausland, Apr 20, 2017
    #9
    OLDSKOOLERnWV and Ozdriver Thank this.
  12. Apr 20, 2017 #10
    OLDSKOOLERnWV

    OLDSKOOLERnWV Captain Redbeard

    16,594
    246,073
    Nov 29, 2011
    West Virginia
    0
    Well... my lock is missing on the drivers side, and since it needs to be installed I bought a new set (2) in a pack. By turning the barrel all the way to the left it pulls out slick as a hounds tooth. Won't be able to with it installed in IMG_7810.JPG the door, not that I can see. Mine is a 1995 W900L.
     
    OLDSKOOLERnWV, Apr 20, 2017
    OLDSKOOLERnWV, Apr 20, 2017
    #10
    Ozdriver Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 4