Big Loads - Post Photos Number 2

The track driven ones. Their not bad. Top heavy though. Is it a 3 track or 4 track unit. Watch when lding the milling piece clears the deck when lding and unlding

 

Judging by the pictures on google it has 4 tracks. I asked a couple people here at the port about them so I think from what I've heard I'll figure it out pretty easily

 

Here's what I come up with. Pretty simple once you figure out how to run it

 

That one was 44k and change. It had a good size winch on the rear as well.

My gross was 86k with the stretch RGN I was pulling.

 

They aren't a big deal. Need two people to load. Can't see squat when your up top. Does it have the conveyor with it?

 

If it is like this one, block the conveyor up, but don't chain too tight as it might bend

 

Unloaded the 988k yesterday at a pit in Linn, TX. 4.5 hours to get the wheels put on. Got everything put away and stacked and cooled off for a bit before started towards Galveston. Loaded this little hoe up earlier. Heading up to Ohio

 

Staying busy this week huh!

 

Wow. 42000 ew for a 2 axel rgn. That seems high

 

Don't forget it's a stretch trailer. I can stretch the well something like 20 feet. Also my tractor weighs 22k empty. I'm away from the truck but if I remember correctly I'm 37k with a regular RGN.