Back in a T680...
Discussion in 'CB Radio Forum' started by Hick, Jun 22, 2017.
Page 7 of 14
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The way I see it is with a 4' firestick antenna the radiating coil is 36 " high, where as with the 10k with 27" shaft the coil is less than 2.5' high so it seems that the firestick would be more effective all things being equal, any experts in antenna theory please correct me if Im wrong in my assumption. As I stated earlier ( forget which thread) I have one Hustler Q27 antenna and would like to get a second one and try them, the shaft is 31" to coil and is very flexible so stress on mount would be minimal.
Hick Thanks this. -
I would have stopped at the 5x5 Francis. Work good, cheap and easily replaceable. I've used them for years. Yeah, they ain't as good as they used to be, but what is? Enjoy reading about all the other antennas tried on this truck though. Good thread!!
Hick, bored silly and wolverine11 Thank this. -
Hick and bored silly Thank this.
-
Hick Thanks this.
-
wolverine11 Thanks this.
-
-
lilillill, bored silly and Hick Thank this.
-
wolverine11 and Hick Thank this.
-
And I think the same way regarding the top loaded antennas. I think they SHOULD work better on this truck. But after some testing, I say that the 4' Firestiks do not work as well as the Wilson 2ks, 5ks or K40s. The 5' worked better than the K40s and about on par with the 2ks and 5ks. But for some reason even the cheap metal Helical Wound BlahBlahs beat those out (but I cheated a bit here by using the K40 shaft in addition to the shaft that came with the antennas, so ya. I did try that with all of the center loads and it did help, more on this below).
Then we have the Francis which is 'continous loaded' and it really shines. You can't even put the other antennas on the same scorecard for some ###### reason that I cannot understand.
So then we have the 10ks (keeping in mind that the 6' Skipshoters were DOA and the 5' Wilson fiberglass are still in the package). It's safe to say that these are TEH B3ST so far. But I'm quickly realizing that they are intended for people that are a whole lot more into this hobby than me and don't mind constantly fiddling with the radio. It is annoying to be sitting somewhere quiet with the gain cranked up just listening to the chatter when Grandma 2 towns over decides to put a couple pieces of Sunbeam in her toaster or your APU decides to charge the batteries. If you want to run some watts and all that, you shouldn't be using the factory crap anyhow - mounts or coax. These things will just never reach their full potential the way that I'm using them. But if you want to bolt them on and can live with everything else, they are worth the money.
But there does seem to be something screwy going on here. Having the load about 2/3rds towards the top of the windshield seems to help a lot for some reason. It helped the center loads even though they still weren't great. The 4' and 5' Firestiks were above this a bit and it killed them. The center loads without a longer shaft were below it and they suffered. The metal antennas and the Francis just 'work' for some reason.
Today will be round 2 for the Skipshooters. I really want to try them. If not, the Wilsons will go on.wolverine11 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 14