This is a pretty good video tutorial on using Garmin's free "Base Camp" desktop software to create custom routes on your desktop or laptop and save them to your Garmin GPS. It will allow for as much or as little granularity as you need. And it seems that once you get through the initial learning curve of the software, the actual process of creating a custom route would be pretty fast, simple and effective. But you'd probably have to put your device in "car mode" to eliminate any potential problems as a trucker following a custom OD route as set by the state.
I'm unsure if the "custom routes" saved would be compatible with Rand McNally devices but I suspect not. Also, I'm, pretty sure these routes can be shared among others (pilot drivers) via email and some drag and drop techniques that you may have to tutor them on.
The video tutorial is done by a motorcycle enthusiast but the application to truck custom routing would still apply ... Some of the nitty gritty begins at around 03:00 (starting a new custom route), and 16:15 (saving to GPS device and loading route at the device level)
On a side note, I wonder if Garmin allows you to somehow save custom routes to a saved location? I can think of several places that have very particular and complex truck route into and back out of [from/to a typical begin/end point]. Otherwise, Garmin could not select the correct route if it's life depended on it.
GPS that lets you program route
Discussion in 'Experienced Truckers' Advice' started by Old Man, Jul 28, 2017.
Page 4 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
All works well enough, but as with Garmins, when you have a trip with multiple via points (waypoints, legs, whatever you want to call them), the route overview will only show the highlight route to the next waypoint. It displays the total trip distance accurately but you have to wait to get to the pending waypoint to THEN see the next trip leg hi-lighted, and so on and so forth until you reach the end. So, you have to take it on faith the device has the route points loaded and will follow accordingly. I suspect Rand McNally does not have this weakness?Lepton1 Thanks this. -
However, I also understand the newer Garmin Dezl's with the "Custom Route Shaping" feature actually works pretty well but not sure how user-friendly the GUI is to use a finger to drag a route like you want. Not yet found a video review with a demonstration of this feature
Also as a side note, I think you have to have an SD card in the Garmin GPS SD slot to save custom routes to from a desktop. I have one but not sure if it's even possible if you don't have one in it.Lepton1 Thanks this. -
I"m guessing this garmin is for computers? Can it be used with a gps antannae for actual guidance? And can it use your cell phone as a bluetooth receiver for actual guidance?
I used to run copilot 9 on windows 7 and used my cell phone as the antannae 2 years later and i have no luck using my bluetooth chips on windows 10 so THAT'S out. My lenovo pc won't use the built in chip. Neither laptop will use the asus bluetooth usb dongle. There just aren't any drivers.
I've used the microsoft thing also. On windows 7 using my cell phone.Last edited: Aug 9, 2017
-
I don't think Base Camp allows for direct GPS guidance inside the software. There are too many affordable, dedicated GPS devices available that are much more functional for mobile use. Why would one need or want guidance via a GPS enabled tablet or laptop?
But for all I know, it may see a GPS receiver and have a navigate function as long as you purchase a street level map. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 4