Long Distance with Interlock On?

Discussion in 'Questions From New Drivers' started by deafaviator, Dec 21, 2017.

  1. Zeviander

    Zeviander Road Train Member

    4,887
    36,995
    Jan 23, 2015
    Winnipeg, MB, CA
    0
    Your diffs will overheat very quickly. They aren't "four wheel drive" they are for reestablishing grip once you lose it in the snow or mud. I've been told, most differentials have safety locks that prevent them from being used in high range (this includes the power divider).

    And if you aren't driving in a straight line, you will shred your tires.
     
    Oxbow Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. not4hire

    not4hire Road Train Member

    7,142
    26,957
    May 16, 2012
    Calgary
    0
    I have never encountered a speed/gear restriction on a power divider. Diff locks, yes, but they're a different animal.
     
    Oxbow, Lepton1, Zeviander and 2 others Thank this.
  4. Hammer166

    Hammer166 Crusty Information Officer

    7,453
    26,983
    Aug 18, 2007
    ~8600+' and loving it!
    0
    My 2001 Sterling had full lockers, and they'd plumbed the override to kill both the diff and power divider locks. Didn't take long to rectify that problem!
     
    Oxbow and not4hire Thank this.
  5. Dave_in_AZ

    Dave_in_AZ Road Train Member

    56,541
    384,180
    May 4, 2015
    0
    I've spaced mine off and left it on for 500 miles. I've run purposely for 500 miles many times in bad weather with it engaged. I've never disengaged / engaged it unless I was sitting at a complete stop.

    I has a Pete mixer that would automatically disengage it at 50MPH while moving. Even throw the switch on the dash back over.

    And yes it makes it suck more fuel.
     
  6. cmrdev

    cmrdev Medium Load Member

    370
    373
    Oct 13, 2017
    0
    I always go 80 mph downhill in snow, disengage interaxle, hit jake on 3rd stage, at the bottom of hill I awlays turn hard left. If still sliding, I apply 90 psi at least on brake pedal. Take it from someone that's been there
     
    Lepton1 Thanks this.
  7. Hammer166

    Hammer166 Crusty Information Officer

    7,453
    26,983
    Aug 18, 2007
    ~8600+' and loving it!
    0
    Let me guess... this is in the Pacific NW, and you're from the Carolinas? :D
     
    Joetro Thanks this.
  8. cmrdev

    cmrdev Medium Load Member

    370
    373
    Oct 13, 2017
    0
    lmao!!
     
  9. NightWind

    NightWind Road Train Member

    2,685
    18,927
    Nov 11, 2006
    Sunny South, AL
    0
    The Jake brake has NOTHING to do with the interlock that is on the engine.
     
  10. cmrdev

    cmrdev Medium Load Member

    370
    373
    Oct 13, 2017
    0
    dude this statement has my mind twisted. Can you explain to me what you are talking about? I'm not being a wise ###. being serious. Jake brake has everything to do with what axles are locked in
     
    Joetro Thanks this.
  11. Oxbow

    Oxbow Road Train Member

    12,787
    132,312
    Nov 24, 2015
    Idaho
    0
    I always thought that the inter-axle lock was between the two drive axles.....never knew it was on the engine.
    Go down a good grade on slick roads with the Jake on full, and let me know what it does.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.