New Tri-Pac installed...

Please do not park next to me. For something that costs 12 K or whatever this thing should be making less noise than mosquito.

 

For a lawn mower muffler!

 

Really? The old ones were set at 12.15, which is too low in my opinion but a fully charged battery is 12.6-12.7 static. I would think it wouldn’t ever shut off.

Do you know if the older units can be changed? I’d like to turn mine up to 12.4.

 

Unfortunately, that is one thing that can’t be changed at the control panel. I’m a cheap ###—I’ll probably just stick a resistor inline on the sense wire.

 

Even though I have mine set @ 12.0 when it kicks in it will run till my batteries are fully charged. With my laptop and tv going @ 12.8 it would kick back on every 10/15minutes after it shut off , very annoying, lol.
The power brick alone is 230w.
I see your other question was answered but, I did have an older and I dont recall personally how to change the bat monitor those. I can't even remember if I had a digital display panel in the sleeper.
For anyone else reading that may have a carrier, it can be done on the display .
panel.

Personally I think it's a really good idea to change them so your not burning off a bunch of unnecessary hours on the unit.

 

Yeah my current one, 2017 model just has the 3 knobs too. To change any settings you have to hook up a laptop with the usb line that comes off the black box. And even then you have to know how to get to and open up the correct settings page.

 

how about the frame? is it galvanized or just painted like older models?