Your joking, right? You check everything the state requires you to check on your pre-trip every day. You check:
Steering play
wipers/washer fluid
both horns
heater/defroster
safety belt is securely mounted
airbreak check
spare fuses/triangles/fire extinguisher
etc. etc.
These are some of the things from the test that I remember and I can honestly tell you I don't check them on a regular basis. I don't turn my wiper/fluid on every morning, I don't check my horns, I don't check my heater in the middle of summer, I don't chock my wheels and check my airbreaks every morning. Call me a bad driver but ain't doing it, I make sure the truck is in good safe mechanical condition and I roll. I happen to remember alot of the crap the state wants you to look at so I'm ok, not everybody will. Oil,water,ps fluid,belts,hoses, tires,lugs, breaks and a short visual inspection with a flashlight is all I do and I've never had a problem. If you do absolutely eveything well than congratulations, your the only one I know.
Swift Academy Licenses Suspended
Discussion in 'Motor Carrier Questions - The Inside Scoop' started by tony282003, Jan 9, 2009.
Page 2 of 28
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The modern CDL has a lot more to it with the knowledge a driver has to have to perform the pre-trip inspection through the driving examination.
I will hazard a guess that those drivers that got their cdl's from that facility were better prepared than a lot of the pre 90's cdl's that were issued.
Does this mean that drivers who got their cdl prior to 1990 are not qualified? No, what it means is that the holder of the pre 1990's cdl who are still in the business stayed there because they are good at what they do and have learned either on their own or through others how to do it right!
Was I prepared to drive truck when I got my first CDL? No. Was I prepared to be a commercial truck driver when I went through that school, No. But what I was prepared to do was to learn the craft of driving on the way to become a professional driver.
Last edited: Jan 10, 2009
doubledragon5 and txviking Thank this. -
-
thats the way it was for me # CR England back in march 2003, get your permit in your home state, goto SLC UT for training, then go to your home state and get your license(that and $5,000 for school that lasted..... 4wks!!!)
i will say this much about CRE, as much as i didnt like their operations, their school was very informative, i did learn alot and im glad they were as anal as they were about "do it our way or dont bother" because their way far exceeded state requirements, out of 40 in my class, only 21 passed -
i guess i got a few ?`s
1)if you go back to home state who`s truck do you use for driving test? 2)and here in iowa they give you a "cheat" sheet to tell dot examaner what you are looking for and why.
-
From What I understand you go back to home state with a mentor (trainer) and take your test with mv examiner. I don't know what you mean about a cheat sheet what is that -
-
-
Thank you for the info. As you can see I'm new at this and I need all the help I can get
-
ithinkican, Wiseguywireless and oldcornbinder Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 28