HELP!!! '13 Volvo D13 shakes & power loss at 1,600 RPM

Discussion in 'Ask An Owner Operator' started by MaxzRig, Jun 3, 2018.

  1. MaxzRig

    MaxzRig Light Load Member

    60
    26
    Feb 20, 2010
    LAS VEGAS, NV
    0
    PLEASE HELP!!! This is my first purchase of big trk & for sure should have dove deeper into the vehicle history & potential problems. But now water under the bridge now.
    2013 D13 Volvo; Low miles (313k) bought at dealer in Fontana, Ca. I felt something of power loss at 1,600 RPM. I asked dealer to look into it as he was doing good on most issues. But I failed to follow up on this one & now in Midland,TX. everybody is backed up here & it may take weeks to check it out. If I could self diagnose the problem, I could fix it asap using local mehcanic.
    Im thinking an injector or two. (Turbo or the chip?) The main thing it does is shakes & slight power loss at 1,600 rpm until about 1,700 rpm. Then shaking stops & pwr goes back to normal.
    Please, anyone with REAL ANSWERS OR SOLUTIONS, PLEASE HELP!!! Im running low on the dough, I did buy a 50k, $ix month extended to cover my butt!!!!
    Thx in advance
    MadMax
     
    Doing_flatbed_nc Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oldironfan

    Oldironfan Road Train Member

    5,777
    5,543
    May 22, 2017
    0
    Injector it seems. They go bad often on volvos.
     
    MaxzRig Thanks this.
  4. LoJackDatHo

    LoJackDatHo Medium Load Member

    446
    752
    Jan 26, 2017
    0
    Do you have white with a touch of blue smoke coming out of exhaust when this happens? Also I agree with old iron on this Injectors, but perplexed by it only at 1600 rpm. When I lose injectors it seems to be through all the gears and maybe cleans up at highway speeds, unless it totally drops out on you, then it’s consistent. Problem is, so many electronic issues it could be as well.
     
  5. win-some-loose-less

    win-some-loose-less Medium Load Member

    691
    997
    Apr 19, 2010
    Mount Vernon tx
    0
    Is this a new problem or since you got the truck..

    I have a 2012 d13 and mine doesn’t like over 1600rpm either, mine doesn’t shake but does fall flat on its face, I always assumed it was the specific programming on it or the fact the new engines don’t like the rpms like the old ones

    when my injectors were bad it missed and shaked at anything over 1/4 throttle over 1000rpm.. sorry can’t help.. good luck
     
    Tug Toy Thanks this.
  6. Oldironfan

    Oldironfan Road Train Member

    5,777
    5,543
    May 22, 2017
    0
    D13 is famous for cups going and injectors. Sometimes every year. I'm no certified wrench but I wish I was. I'm not sure why the high rate of failure. It could be the high pressure of the fuel I'm thinking.
     
  7. Johny41

    Johny41 Road Train Member

    1,192
    1,020
    Feb 10, 2011
    Ontario, Canada
    0
    Injector cups most likely. Does it start easy in the mornimg or have a long cranking, hard start ?
     
  8. Commander1

    Commander1 Light Load Member

    100
    150
    Aug 16, 2017
    0
    What’s the purpose of running it up to 1600?
     
  9. Oldironfan

    Oldironfan Road Train Member

    5,777
    5,543
    May 22, 2017
    0
    Why not? It's overhead cam.
     
  10. shogun

    shogun Road Train Member

    6,075
    72,159
    Jan 23, 2009
    Doing a regen
    0
    That motor gets best fuel mileage and torque at 1450 or less. It’s pointless to run it to 1600.
     
    Elroythekid, daf105paccar and 06driver Thank this.
  11. fargonaz

    fargonaz Road Train Member

    1,167
    4,583
    Feb 9, 2015
    Mesa, AZ
    0
    Does it shake in every gear? just OD? What type of transmission?

    More info would be nice.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.