Instant O/O and Load boards

Discussion in 'Ask An Owner Operator' started by PharmPhail, Jan 26, 2009.

  1. JasonTheRock

    JasonTheRock Light Load Member

    257
    102
    Feb 7, 2009
    Oakland, Ca.
    0
    :biggrin_2559::biggrin_2559::biggrin_2559: !!!!!!!!!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. JasonTheRock

    JasonTheRock Light Load Member

    257
    102
    Feb 7, 2009
    Oakland, Ca.
    0

    I was suprised that Napa has this type of stuff!

    Try looking on the internet, you can find deals , however be careful of the shipping charges. For example a seller on ebay had a box of ten 4" hooked flatbed straps for $95 but the shipping was $45!
     
  4. MedicineMan

    MedicineMan Road Train Member

    5,799
    6,440
    Jan 13, 2007
    Woodville, TX
    0
    some NAPA's carry lots of commercial truck stuff others dont' carry any. they change based on the local need. I know my local one is useless. the one I had when I lived in WI carried almost anything for a truck
     
  5. TX_Proud

    TX_Proud Light Load Member

    208
    54
    Jan 2, 2007
    Houston, TX
    0
    Tractor Supply also has a hose shop. And some ready-to-buy hydraulic lines. Used then in a pinch.
     
  6. Scarecrow03

    Scarecrow03 Road Train Member

    3,411
    7,443
    Sep 27, 2006
    In Your Head
    0
    Just a little bit of info for ya, Pharm. That new line is only shorter than the one that was on there before because the one that broke had been stretched out. Over time those plastic lines will naturally stretch from all the turning and maneuvering. This is what leads to them breaking and it's far more likely to be the red (supply/emergency) line that will break. Murphy loves trucking. A guy can get around without a blue (service) line long enough to get to a shop, and Murphy knows that so he'll make a driver look like a dumb arse.

    One company I drove for would only use the rubber lines and they are a lot better. Depending on how the lines come out from the back of your cab onto the catwalk area, you might have to make some minor modifications to the truck so you can use those rubber air lines and not have them rubbing on the catwalk while running down the road. DOT will have a hay day with that one. Don't ask me how I know. :biggrin_25525:

    A cheap and simple modification is a strategically placed bungee/tarp strap. A bit more sofisticated method would be one of those spring systems you'll find at just about any truck stop.


     
  7. BabiBoi357

    BabiBoi357 Light Load Member

    109
    65
    Feb 5, 2009
    Birmingham, Al.
    0

    I work for a natural gas pipeline company. We have a Napa here That stock gasket just for us for a Cooper GMV compressor engine. (Commercial Engine) They do this for us because it takes us to long to get the gasket we need. Of course there's a 10% surcharge and were the only one to use these gaskets. But we purchase enough of them that it makes it worth their while. Small town, good people. Now we get our gaskets when we need them and they make a little money for helping us out. Win-win all the way around.
     
  8. PharmPhail

    PharmPhail Road Train Member

    3,084
    1,125
    Nov 7, 2008
    NC
    0
    Here's some figures. More analysis to come. These are warts and all figures, I don't know at what point in the process you guys typically start talking about cpm, so I included all perspectives. We go by ton, I'm just breaking it down how you guys usually discuss it.

    Last column is after deadhead and broker, PTT= Pay to truck miles. Total Pay is amount I invoiced for that the truck will receive.

    Also these are RUBBER TO THE ROAD miles as figured by google maps with actual routes driven.


    [​IMG]
     
    Baack, RBPC and LBZ Thank this.
  9. PharmPhail

    PharmPhail Road Train Member

    3,084
    1,125
    Nov 7, 2008
    NC
    0
    Loads 4 through 8 were done in one week. Week started on Sunday and ended the following Saturday, NO home time:

    Miles Driven: 3,734

    Invoiced Amount: $4257.54
    Fuel Cost: $1249.07

    Amount to Truck: $3008.47

    Truck/Trailer/Insurance: $627.90 per week

    Left for driver pay and several funds: $2,380.57 (best week)
    _________________________________________________________

    That would be a perfect week, but numbers are less impressive over the whole period:

    Miles Driven: 5,481

    Invoiced Amount: $6455.15
    Fuel Cost: $2373.00

    Amount to truck: $4082.18

    Truck/Trailer/insurance: $1350 (half month)

    Left for driver pay and several funds: $2732.18 ($1138.40/wk)

    That last figure includes the sitting times of the second week along with home time mixed in from Friday March 13 to Monday March 31.
     
  10. BabiBoi357

    BabiBoi357 Light Load Member

    109
    65
    Feb 5, 2009
    Birmingham, Al.
    0

    How many day did all these trips take you?
     
  11. BabiBoi357

    BabiBoi357 Light Load Member

    109
    65
    Feb 5, 2009
    Birmingham, Al.
    0
    disreguard the previous. Got a lil ahead of my self. This is great news PP. I may have to rethink the flat bed thing and go another route. Looks like your doing well with the belly dump. My niche, I guess you can say is that I won't have a truck payment, as I am paying cash for a 387PETE. It a 2005/475 Cat/13sp.

    Question???
    How much more is for insurance with you on authority. Thanks.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.