Been sitting so long I got critters hanging on the mirrors.....
![]()
Hopefully they get me unloaded before sunrise but it ain't lookin' good.
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 8734 of 21429
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
cke, 1951 ford, Crusader66 and 10 others Thank this. -
Google it. -
By the way @1951 ford
You’re the only feller I ever knew that welds good enough to just make fine sawdust on the floor.... -
This is a broke axle off a Vermeer TE-330 hay Tedder. Of course it broke at 2pm on July 3rd and the closest new part was in Pella, IA. We couldn’t afford the down time so I welded it. Pretty touchy since the axle had to be straight after and the weld had to be a 90 degrees corner to take the seal and the wheel bearing had to slide over the shaft. The bevel I ground into the axle is weld prep.
I told the operator I set the over/under on this repair at 1 hour and he took the under. He lost because it’s still going
-
Steve
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 8734 of 21429