Instant O/O and Load boards

That is right. I didnt have the work done on the truck i have, it was the previous owner for the work they did I dont understand why he didnt just have a reman put in because they replaced everything. As far as the cummins go a basic inframe with 3 reman heads from cummins was about 8500 the kit from cummins is 4500 with the heads around here local shops will inframe one for around 6000-7000 and give u some warranty on it. You can go with some aftermarket stuff if u choose and get it a little cheaper but I myself will stick with the oem parts. You also dont have to replace the heads if you dont want and that would bring the price down considerbly just dont let her blow or chances are ur going to pay the big money. I beleave the n14 remans run around 15-20 thousand as well.

 

$8500 for a N14 sounds about right but im going to ask it may be here but i just havent seen the reson to do an rebuild yt how many mi on that detroit and how old is it i have done remans on S60 Detroits and i dont think it came up that high and why do it and i have a fue sugestons on doing a S60 Detroit Diesel but it depends on how many mi are on her and if its leaking at the head gaskit or not

 

Like I said I didnt do it just have the paper work on it and verified it with the shop before I bought it. It threw a rod and ruined the block according to the shop I will have to look at the bill but they replaced everything, plus the clutch and they replaced the drums and pads at the same time so that ran it up a lttle as it was on the bill as well.It ran 900,000 before the overhaul. I personally wouldnt have put 20000 in it at that point but they did, the driver then drove it 35000 miles and tore the transmisson out of it and had a reman put in. I got it at that point paid the payoff on it and paid the trans bill on it. I have ran it about 10000 miles with no trouble.

 

How did this happen? You do want at least 6 months of company driver experience. There are companies that will provide you that if your record and background are acceptable enough to get your own authority.

 

How many miles does the average engine get before needing an overhaul?

 

that's enirely dependant on maintenance and a god bit of luck.

it can go 500k or it can go 1.5 million. literally, it's impossible to say.

some general guidlines would be about 700k on a detroit with decent maintenance. I've had two go to a million but that was with exceptional maintenance and then again, luck. I had one go 200k and blow up so you just never know.

cats will generally go well over a million although the new emission motors run so hot all of them seem to be dying early deaths. Look at truck paper and it's disturbing to see so many trucks with fresh inframes at 500k.

newer cummins are probably on par with detroits, I'm no expert though. old cummins your looking at an inframe every 400k

 

That's good pharm just beat the local guys to it.

 

If you have your own authority, in this case intrastate, you could haul for the farmer yourself. If you are under a brokers authority could get in trouble. Probably wouldn't unless someone turned you in.