fault code SA 16 DTC P030500

Discussion in 'Volvo Forum' started by SWTRANSPORTATION, Dec 20, 2019.

  1. Newto Trucking

    Newto Trucking Medium Load Member

    359
    225
    Dec 26, 2013
    NE Illinois
    0
    A piece of a broken valve most likely exhaust valve. I would check a turbo as well, cause sometimes if the smaller pieces go thru the turbo they damage the vanes and VGT actuator got stuck.
     
    Jack carg Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. mobilerepairboise

    mobilerepairboise Light Load Member

    61
    42
    Jul 10, 2018
    Boise Idaho
    0
    Valve
     
    Jack carg and SWTRANSPORTATION Thank this.
  4. mobilerepairboise

    mobilerepairboise Light Load Member

    61
    42
    Jul 10, 2018
    Boise Idaho
    0
    It’s out of turbo.
     
    Jack carg and SWTRANSPORTATION Thank this.
  5. Newto Trucking

    Newto Trucking Medium Load Member

    359
    225
    Dec 26, 2013
    NE Illinois
    0
    How’s the turbo??? Rebuild underway??
     
    Jack carg Thanks this.
  6. mobilerepairboise

    mobilerepairboise Light Load Member

    61
    42
    Jul 10, 2018
    Boise Idaho
    0
    Couple light scratches. Nothing major. Tomorrow’s morning gonna take head off to see what’s there. Customer wonts to replace whole engine
     
  7. SWTRANSPORTATION

    SWTRANSPORTATION Bobtail Member

    12
    2
    Nov 19, 2018
    0
    Were you able to fix the problem??
    I'm still struggling with my problem , after I replace the cups and one injector 2k miles I got misfire cylinder 5 , I go for another shop and they recommed to replace the whole injectors and cups , after that about 500miles I got the same code misfire cylinder 5 ,
    The turbo charger works fine , the problem is the engine shaking and tapping , lifter noise. losing
    power

     
  8. Newto Trucking

    Newto Trucking Medium Load Member

    359
    225
    Dec 26, 2013
    NE Illinois
    0
    Did you do compression test on a computer??? You might have a problem with exhaust valve or valve seat in cylinder 5.
     
  9. SWTRANSPORTATION

    SWTRANSPORTATION Bobtail Member

    12
    2
    Nov 19, 2018
    0
    Yes. This what the mechanic said on the phone today , I need to go for has shop to do test , do you have any idea about how much lebor Time to remove the head and replacing the valve ?
     
  10. Rob100100

    Rob100100 Light Load Member

    206
    121
    Mar 5, 2016
    0
    Not cheap and takes time. Good luck and let us know what happens please.
     
    SWTRANSPORTATION Thanks this.
  11. SWTRANSPORTATION

    SWTRANSPORTATION Bobtail Member

    12
    2
    Nov 19, 2018
    0
    Yes I know it's not cheap , the shop just send me quote from 9k New cylinder head and gasket
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.