Removing huck bolts.....Anybody?

Try an air chisel or air hammer. Spend some time on it and they will eventually work out.

 

Jackhammer maybe. Air hammer wont put a dent in these....... has been my experience. Not even the CP717 will touch them.

 

Get them cherry hot then twenty pound sledge hammer.

 

Had to replace a ton of cross members that became loose on Cascadias. Always used a torch and air hammer and replaced with flanged frame bolts. Just put some welding blankets over the air bags and tires. They like to fall and melt through them.

 

I'd say best thing for a Crapcadia would be to catch on fire...