Please help. I have a Maxitorque ES trans and I'm getting a grinding noise in low range only. Noise sounds like gears are slightly too far apart to engage. I switch to high range and those gears work fine. Also it seems to be more common if I shift into gear after coming to a stop. Had the same issue before and found the bolt on the shifter fork in trans loose. Problem as returned but the bolt is not loose. Please help
8ll Maxitorque ES grinding in low range
Discussion in 'Mack Forum' started by 876trucking, Feb 11, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Well it could be a number of things. Input shaft bearing, cross shafts, could be gears. Could even be the springs in one of your clutch disks.
Either way, i Would just pull the trans and check everything out. No big deal. You can do it -
Thank you. How would I go about checking the cross shafts. Not really sure what to look for.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.