That or spray it right into the intake manifold. Might have a plug in it, or take hose off at ata cooler shoot it straight in
Truck won't start
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Gix1k, Mar 1, 2020.
Page 32 of 41
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I'm no mechanic, but I do have some mechanical background. Those codes likely don't mean much if you had an electrical issue (ground wire rubbed through). That can throw some wacky info to the ECM and throw codes.
I'm still leaning towards a weak starter and a blockage either in the intake or exhaust.Gix1k and Rideandrepair Thank this. -
Dump truck air cleaners are usually pretty dirty and dirt packed, so pull it out when using ether. Any sign of smoke? Low on compression usually white smoke when cranking.
lwlevens, Gix1k, Rideandrepair and 1 other person Thank this. -
I, like everyone else can’t stress enough, it will start with ether. Chances are it will run, once you get it going enough with ether. I’m sure you’re confused, having someone face to face say you need as Overhaul. Honestly, that’s reakly jumping the gun, bordering flat out bad advice.
lwlevens and Isafarmboy Thank this. -
Here’s a pic of my Detroit. See the black hose, connected to the silver intake manifold. Take it off and spray it straight in the manifold.
-
-
A lot has been asked...I'll address them
-
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 32 of 41