Looking at a kw with 440,000 miles on an isx 450, the speck sheet shows a dyno was done and the numbers are 409 hp(91%) and 10" of blow by, are these good numbers? i tried finding something online but no luck yet!
thanx,
gary
dyno numbers....what do they mean!
Discussion in 'Trucks [ Eighteen Wheelers ]' started by garym, Aug 29, 2009.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
anybody???
-
18 inches of blow-by is max and i have always heard 80% horse is the minium
-
It should list the shop that did the Dyno on the sheet. Get the name and number and ask them about the results.
-
There was no name on the paper!! Talking to a couple of salesmen i've heard that cummins will not do warranty on anything lower than 13", while the detroits should be down around 3,4,5 etc. It's a start i guess. One salesman said anything below 80% would be suspect!!
garym
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.