Call the nearest Detroit eng. shop and find out what they est. the cost will be and take it over to their shop not the truck dealer. All they do every day is work on motors, they have set rates to do top end or in frame over/haul , but it may just need a new oil pump put on then pay them while you are looking for a new driving job? The Mi. on truck maybe 1 mil. 250,000 not just 250,000 mi.??
How much to rebuild top end of engine?
Discussion in 'Questions From New Drivers' started by Jdm5jdm5, Jun 24, 2020.
Page 2 of 5
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Things happen. The 1st let me say it is illegal to wear earphones while driving even in a 4 wheeler, if they cover both ears. Basically what you did is over rev the engine you probly bent push rods and did other damage. It's going to be very expensive. Chalk it up as a learning experience, and don't wear earphones while driving
-
When you say very expensive, what is a rough estimate you think?
-
It really depends on how severe the damage is. Could have cracked the head, bent valves, damaged rockers, sent metal through out the engine. It may need a full rebuild, they won't know until it is taken a part. If a dealer is doing the work, it could be in excess of $20k
-
Take it to the detroit shop.
-
2800 RPMS?!?!?!?!? DUDE!!!!!!! My goodness I've never even seen any truck I've driven reach that but if you're going to flip the bill for it, it's going to be a killer. You may get lucky at $10 - $15000 and that would be for an already rebuilt one depending on where you get it. Another member said about 20k and he may be generous there
Jdm5jdm5 Thanks this. -
-
Your employer can't make you pay for it, even if you did the damage. He/She is just trying to scare you.
-
-
So figure at least $10,000. Hope he pays you well.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 5