Phila Pa to Aberdeen Md

I use that route all the time to go to Aberdeen from the south. That sign refers to a small road on the north side of the dam. You stay on 1 and then about 10 miles later you cut back East following the signs to I-95. I will post the route in just a bit.

Stay on 1 until you get to Md 24 and it takes you straight to 95. Easy route just a bit hilly, scales too but have yet to see them open.

Oh and yes going south you don't have to pay that crappy bridge toll. Its a good route to avoid those scales tho.

 

I'm confused

If Ur coming from the South (heading North on Rt 1) and heading to Aberdeen, why are U even crossing the Dam?

 

To avoid the bridge toll. I am usually leaving Aberdeen heading north not going to it. I just reversed the route I take. You're def right tho, don't need that route to get there from the south unless you want to see that ####ty dam as a tourist stop.

 

If you have Best Pass it has this for checking tolls. Truck Toll Calculator

 

Fyi no 53' trailers on the conowingo dam rt 1. Going south there is a scale about 1 mile past the dam, and no turn off be for the scale. Fine is $500. Scale is generally open from 6am to 3pm

 

You only pay going North bound

 

Tyvm, I never saw a sign and after reading your post looked it up. Seems they like to switch between writing over width and over length tickets.

 

You mean going north, the scale is 1 mile before you get to the dam.

 

No sorry it is after you cross the dam while going south You will get a dot inspection as well