O/O that run RG trailers?

Discussion in 'Ask An Owner Operator' started by LaComa, Dec 24, 2009.

  1. RenegadeTrucker

    RenegadeTrucker Road Train Member

    2,754
    2,383
    Dec 25, 2009
    Montana
    0
    +1 using a fax to Email Service has made a huge difference for me. Getting permits on the fly allowed me to drive instead of waiting on a fax, that right there is money in the bank.

    I get my email on my blackberry, so I can check it on the fly. It sure makes things easy.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. RAG

    RAG R.I.P.

    541
    4,922
    Nov 23, 2007
    Tonga
    0

    I know I am a little late to the party,But if you live in Sananna your in a great spot with the port being there. There are tons of oversize stuff comming out of there.I know I am down there 20-30 times a year to grab new cranes . Find some of the local brokers that book the OS/OD stuff.
    And a e-fax # or other provider is a must.I have been sitting on the scales printing permits.Make sure the rate you quote has you DH miles in it as you won't have very good luck getting loaded back unless you are leased to some HH outfit. Good luck
    rag
     
  4. LaComa

    LaComa Light Load Member

    85
    44
    Nov 21, 2009
    Savannah, GA
    0
    Thanks, for the tips guys. Im sure it will be helpful. Does anyone know any brokers in the savannah area?
     
  5. leftlanetruckin

    leftlanetruckin Road Train Member

    3,607
    3,161
    Mar 12, 2009
    Mo Via Blackpool,Lancs.
    0
    Dont listen to what the idiots like TMC and the other mega companies are doing so far as rates go. They got big for a reason (cheap freight).
    I pull either a 2 axle RGN or a 3 axle stretch RGN and do pretty good myself leased to a company.
    Pick wisely and you will be fine.
    I also run a printer in the truck, and my wife who stays at home handles the permit faxing/emailing to me.
    Martin
     
  6. LaComa

    LaComa Light Load Member

    85
    44
    Nov 21, 2009
    Savannah, GA
    0
    Is anyone running c13 cat? With the R/G. I am looking at a 379 with a c13 any thoughts? It has a 10 speed with 3:55 I think will check and post tomorrow.
     
  7. Stroked F550

    Stroked F550 Medium Load Member

    325
    42
    Jan 23, 2008
    somewhere
    0
    C13 is a little small to be pulling oversize loads with and your gonna want at least a 13 speed
     
  8. RAG

    RAG R.I.P.

    541
    4,922
    Nov 23, 2007
    Tonga
    0


    That may be ok for doing local stuff but for otr you are gonna want a bunch more HP and gears
    I run a 550 with a 18 spd with 411 rears and there a bunch of times I wish I had about 200 more hp
     
  9. LaComa

    LaComa Light Load Member

    85
    44
    Nov 21, 2009
    Savannah, GA
    0
    The guys hauling freight out of the port of Savannah, are you getting the loads off of a load board. Or using brokers?
     
  10. mastllc

    mastllc Medium Load Member

    379
    150
    Aug 28, 2008
    somewhere in ga
    0
    how do the annual permits work after reading the georgia website it sounds like you will need more that one. my questin is are they good for everything within their limits and with them do the holiday/ and curfews still apply? and also can you get them for more than one state.
    Thanks.
     
  11. musicmaker

    musicmaker Medium Load Member

    561
    145
    Dec 25, 2009
    Fort Madison, IA
    0
    Annual permits are good for the weight and sizes listed on the permit. All the curfews, holiday and hours of operation still apply. In Georgia you also need a permit for the yellow beacon. I dont have a Ga. annual but do have the IA and UT annual
     
    mastllc Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.