Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

ISX oil by-pass help

Discussion in 'Trucks [ Eighteen Wheelers ]' started by joey83854, Jan 2, 2010.

  1. Jan 2, 2010 #1
    joey83854

    joey83854 Bobtail Member

    33
    5
    Mar 1, 2009
    post falls id.
    0
    I have a 05 volvo with a isx cummins at supposedly 450 horse HAH! anyways I am installing a by- pass kit in it,I cannot see a port or place on the block to install my feed line,can anyone tell me the place on the block that i can tap into? I will probably tap into the oil fill tube or possibly the drain plug,just need help on the other side. thanks in advance. Joe
     
    joey83854, Jan 2, 2010
    joey83854, Jan 2, 2010
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 2, 2010 #2
    joey83854

    joey83854 Bobtail Member

    33
    5
    Mar 1, 2009
    post falls id.
    0
    anyone know this?
     
    joey83854, Jan 2, 2010
    joey83854, Jan 2, 2010
    #2
  4. Jan 3, 2010 #3
    Cowpie1

    Cowpie1 Road Train Member

    5,569
    4,647
    Nov 25, 2008
    Kellogg, IA
    0
    There are a number of oil port plugs in the both sides of the block. I used one just ahead and above the full flow oil filter on the right side. For a return, there are a number of plugs along and above where the oil pan is bolted on. Tap into one of these for your return line. I used one just behind the full flow filter. There oil port and return port on the left side about 3/4 back on the block if you need to use the left side to mount your bypass unit. You will have to just check the sizes they are as I can't remember them.

    The port plugs are recessed into the block and you will need a strong hex socket wrench to remove them. They are installed pretty tight, but a good 1/2" breaker bar and a hex socket will loosen them. Then just install you hose fittings.

    Hope this helps.
     
    Cowpie1, Jan 3, 2010
    Cowpie1, Jan 3, 2010
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.