Lift axle spread 48 foot fontaine

Discussion in 'Ask An Owner Operator' started by 77fib77, Aug 21, 2022.

  1. 77fib77

    77fib77 Road Train Member

    11,377
    74,121
    Jul 7, 2010
    St Louis
    0
    IMG_20220820_171035677.jpg




    So I got the center plug, which is the picture. What do I need to make an axle lift? Is it the back axle that looses air? It's a 10 year old LS trailer, so I don't know it will work anyway. But I have a tight drive way to back into and I'm curious if it would help me.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Cummins_444

    Cummins_444 Medium Load Member

    605
    1,014
    Apr 28, 2008
    Northwest, IN
    0
    You need a iso socket on the tractor side and an iso cord. Then you need to ground the tractors side iso socket pin. put a switch in your dash or use an existing one and run a power wire from the switch to the iso socket on your tractor. Either test the pins or take off the trailer socket to figure out which one is the correct pin that dumps the air.
     
    Bean Jr. and 77fib77 Thank this.
  4. abyliks

    abyliks Road Train Member

    4,025
    9,475
    May 2, 2010
    ludlow MA
    0
    Usually the rear one dumps, wiring a valve In to the front will also help and back easier then a set of tandems.

    you could always shut the air off the the front bags and strap the front axle up if you had a far dead head, hillbilly lift axle type of thing
     
    77fib77 and mslashbar Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.