Where is everyone #5

Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.

  1. CAXPT

    CAXPT Road Train Member

    3,125
    14,100
    Feb 10, 2008
    Michigan
    0
    If you were inclined to get a Harley, I'd suggest taking the Harley-Davidson Riding Academy New Rider Course. The cost of the course can be used to put a down payment on a bike. Their trainers are top notch, and you will learn to ride, right.
    Wife took it, she was complete newbie, I took it with her so she wouldn't feel alone, and I learned a few 'proper' things that I hadn't been doing right as well. It's grueling but they train you to use that clutch zone like Six says, so you can slow ride to a stop, never drop your feet and keep the bike level. They also drill it into your head to ride with your head on a swivel, because no one else is looking out for you, but I suspect most of use having been drivers know that already, but when on the bike, we don't have the luxury of a semi for protection. :)
    If the cost is too high or you're not a Harley buyer, try a local college. They often offer the courses as well, and they are taught by equally qualified MSF (Motorcycle Safety Foundation) certified instructors, and usually at a more reasonable cost than the Harley course, but of course, there's no option for the down payment either. ;)
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. CAXPT

    CAXPT Road Train Member

    3,125
    14,100
    Feb 10, 2008
    Michigan
    0
    Yeah, I was listening to that, too. One of my favorite things to do with the manuevers. Kept in practice, and one day when cleaning my bike, I sliced my finger on the sharpened chrome edge of the foot pad. Realized I was going to have to change it out before washing it again. :)
    :banghead:
     
  4. CAXPT

    CAXPT Road Train Member

    3,125
    14,100
    Feb 10, 2008
    Michigan
    0
    Yes, sir, that was one of the bad habits I had to lose, also when taking the course with the wife. That and keeping the last two fingers off the brake handle for going into that turn with dirt bikes. :)
     
    Last edited: May 21, 2023
  5. CAXPT

    CAXPT Road Train Member

    3,125
    14,100
    Feb 10, 2008
    Michigan
    0
    Check out a guy on YouTube, Mike Festiva, and watch those for a while, especially his hints for new welders and such, and go from there. He reviews welders and shows extensive project that he does with the welding giving good hints as he goes along. You'll find yourself understanding that welding is both art and science, but you can do it with only trial and error art, if you have to. He makes you curious to learn more. :)
     
  6. Big Road Skateboard

    Big Road Skateboard Road Train Member

    6,160
    33,730
    May 2, 2021
    0
    Not sure if it's the same everywhere, but my son and his wife took the Harley course on their Hondas a year or so after first starting to ride.

    He took another from an independent police officer offering some weelend classes too. Said he learned a lot at both, and want's to do them again.

    I plan on it somewhere
     
    Last edited: May 21, 2023
    singlescrewshaker, cke, CAXPT and 4 others Thank this.
  7. Big Road Skateboard

    Big Road Skateboard Road Train Member

    6,160
    33,730
    May 2, 2021
    0
    That sucks dude. Good lookin truck too. Havevyou crawled around up under it yet?
     
    CAXPT, singlescrewshaker, cke and 4 others Thank this.
  8. Big Road Skateboard

    Big Road Skateboard Road Train Member

    6,160
    33,730
    May 2, 2021
    0


    I still use my grandpa's old buzzbox most of the time. Bet it's 60 years old. I've seen used old ones 75-100$
     
    CAXPT, singlescrewshaker, cke and 3 others Thank this.
  9. MACK E-6

    MACK E-6 Moderator Staff Member

    48,858
    226,224
    Sep 19, 2005
    Baltimore, MD
    0
    That’s a definite along with plenty of good scrap steel, at least for the practice aspect.

    I would add though that a point in the right direction does help a bit. Not everybody picks up vertical right off the bat. I still have trouble with it.
     
    CAXPT, singlescrewshaker, cke and 4 others Thank this.
  10. jamespmack

    jamespmack Road Train Member

    19,980
    215,674
    Mar 25, 2014
    OH
    0

    Glad your ok. But most likely they are gonna total it. Wouldn't bother to repair, but insurance most likely will not.
     
    CAXPT, singlescrewshaker, cke and 7 others Thank this.
  11. Big Road Skateboard

    Big Road Skateboard Road Train Member

    6,160
    33,730
    May 2, 2021
    0
    Back to work today Denver bound. Nice little addition with this USB powered fan 20230521_075039.jpg
     
    CAXPT, singlescrewshaker, cke and 5 others Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.