Gone and Done it, Co. driver 2 O/O
Discussion in 'Ask An Owner Operator' started by Bigray, May 16, 2010.
Page 7 of 30
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
hehe..
-
thx. I do pay attention to you exp. drivers and i'm not afraid to ask question's.
the banner on the back is what is giving me fits, can't seem to find good mounting points, i eventually stopped and used some duct tape to support the top of banner i hope it holds.
the strobe on the rear was gone when i had to shut down for the day, darn roads in IL. are RUFFFF.
Stuck in mt. vernon till mon. a.m. sheeesh. -
looks good ray!!! like to little devil horns sticking out!!! but professionaly done on the lights there big guy
-
see ray told you rag would be proud

-
that rear light when you get home make a bracket for it so you can bolt it in,the magnets arnt that strong ,as far as the banner i make them post we were talking about to attach to the rear sides of the trailers,,,and or walk around the truck stop to get your self some ideas,if there any heavy haulers there an either talk to them or look and see how theirs are attached????
just a suggestion there big dog
-
I finally got all of my light's working on the trk/trl, ones on the truck were just corroded and blown light's, trl had a broken wire along with some bare ones, got the magnet light wired properly, pic below.
-
Get rid of those crappy plastic ones and get some 8' wide mesh ones
Pinch the bungies closed on the sign end when you get the correct length ones
Next time you use a mag mount strobe light pull a couple bungies across it.
If your still in Mt Vernon IL try the Holiday Inn sports bar
One block from the TA
rag -
Hey BIGRAY, nice looking truck. Good luch to you.
-
see i knew there was a better way
but it had to come from someone that dos this everyday for a liveing
,, tricks of the trade
thanks rag
RAG Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 7 of 30