I have a Cobra 25 LTD WX Classic CB radio I bought back in 1997 when I drove for the Well Service company. After getting out of the truck I put the radio away and headed to a new job. I haven't had this thing out since then.
So, I hook the thing up in my pickup the other day to see if it works and it, well, sort of does... I receive from others fine. Even get my signal out when I just key the mic, but nothing when I talk. I try to get a radio check and nothing. I've played with it, keying the mic and have gotten a response back from guys keying the mic back. What can I do? Should I go buy a new mic and try it? If I buy one and it ends up not being the problem will the TA take it back? THanks for the help. I have an old magnetic mount antenna, could this be the problem? Oh and the weather band works perfectly fine.
![]()
So I got this problem...
Discussion in 'CB Radio Forum' started by hindsy, Jun 7, 2010.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Sounds like it could be your mic.
-
First check the ground on the coax. Sounds like a problem I had in the spring with coax corrosion. I replace my coax every other year at least. The guys that use the clear shield coax know what I am talking about. It starts to turn green even if it has heat shrink to seal the connectors. A CB shop will test your mic for free. The bad news is that if it is the coax you will need a new antenna setup most likely as the majority of them are a sealed unit so you can't replace just the coax.
-
Is the mic gain all the way up?
Are your SWR's 1.5:1 or less?
Check these 2 items first. -
sound like it might be a dust problem if its been sitting for a while might just need cleaning get some electrical contact spray cleaner and clean all the electrical contacts
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.