Fuel Temp/Boost wire

mr.cowboy.i am to trying to find out wich wire on a three wire to use.there is a thread on here some place that gives a pix of a three wire,still cant make heads or tails of wich wire to use. p-wee

 

the boost wire? its the green wire... you cut the green wire and put the 1.5k ohm resistor between very simple!

 

Thanks ronnyenns!!!! Is it the same for the fuel temp? p-wee

 

I'm not sure on that cause my truck had a 2 wire fuel temp so I just had to unplug the sensor and put a 150 ohm resistor between, but if it's a 3 wire maybe someone else could chime in..

 

I use a 150 ohm 1/2 watt in my two wire set up Works great.

 

The 150 will work just fine. Fold the wire over on each end of the resistor to make it fatter then plug it into the harness and tape it up to protect it from the direct elements. Make sure you pull it off if you go into cat for service as many cat dealers will pull it anyway and throw it away and not tell you about it.

 

I would like to keep this thread going, there are a lot of people on here tonight, can anyone point us to the directions for making a 3 wire fuel temp wire?? I also thought I saw the directions a while ago, but I'll be ###### if I can find them now that I've got time to do it. Any help greatly appreciated.

 

Also would like to know how to do it on a 3 wire. Anyone?