Hello,
I have a 2000 6NZ and this am it spun the bearings in the CAM
Truck is at (lucky i made it there) local CAT shop whom i trust.
I am 100% sure I gotta have a new cam possibly head but maybe just bearings in head. They are going to start tearing it down in the morning. I have seen alot of threads talking about the Marine CAM Shaft and I would like to know if i should go with that instead of the Original?
Also if anyone has any suggestions, ideas or anything please let me know as I will be talking to them tomorrow or monday for sure.
TIA
jay
HELP!!!! 6NZ Cam Shaft
Discussion in 'Trucks [ Eighteen Wheelers ]' started by jaysolomon, Feb 18, 2011.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
MR. HANEY, WHERE ARE YOU.........? SOMEONE NEEDS YOU HERE !!! lol, you have to find mr. haney, get a moderator to PM him.
-
I sent Mr. Haney a PM for you, hopefully he will contact you, let me know what happens, goodluck to you.
-
I'd be surprised if a Cat house put a marine cam in a road truck due to emissions/legal issues but keep us posted. If you have a good relationship with them maybe, I dunno, but I bet corporate would never knowingly let such a thing happen. I believe all the guys on here doing that kind of swap have it done by an independant mechanic.
-
-
Try searching for part # 130-9710 until somebody that knows more than part numbers comes along..Maybe you can buy it from the parts side and carry it over to the service side-kind of a see no evil, speak no evil thing.
-
Diesel Dave.........I got the PM and thought it was you that had the problem. I did realize that you'd copied this gentlemans post, ignore my PM...........here's my PM with some editing to Diesel Dave. The editing pertained to CA and the smoke police
Diesel Dave Thanks this. -
Jay
If the CAT shop will install the camshaft I'd would definately try to get them to install the marine cam 130-9710 in the engine. The problem is the CAT shop may not want to do this. You may need to purchase the cam seperatlty from the parts department and physically carry it into the shop and tell the shop manger you want this camshaft installed. This will keep the camshaft part number off the repair order and the bill for the repair. By doing this you take the resposibility away from the shop for installing the wrong part in the truck that doesn't meet emission standards for when the engine was built.
The only other thing I'd consider is a fast spool turbo similar to PDI Stage 1 and a PDI extrude honed manifold for your application. These two parts will get more air into the engine and increase throttle response. You could also do some ECM mild tuning
Being that you are based in CA, it makes it hard to do much and worry about the smoke police not nabbing you. The things I've listed should increase throttle response, Hp, and fuel mileage without much of an increase in smoke.Ozdriver Thanks this. -
Really useful post..
-
thanks for reply(s)!!!
Sorry I havent responded sooner, but since truck is down my wife has me laying hard wood in kids room...
Anyways I will call around and see what the cheapest price is for the cam and give it a try. I have a few good friends that work at local CAT shop so I may be able to get it done.
Thanks and by the way I am based in ALABAMA not CA... Have not had time to fix profile.CATshaker Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3
Related Categories
-
The diff lock light is always...
caucasus_a posted Jun 18, 2025 at 2:30 AM -
Paccar OBD part 2. New pictures.
Deezl Smoke posted Jun 17, 2025 at 2:53 PM -
2013 T660 Flasher/Hazards Relay
sturgelltrucking posted Jun 17, 2025 at 12:30 PM -
2012 Peterbuilt 388 Headlight Issue
Encs366 posted Jun 17, 2025 at 8:19 AM -
2001 Peterbilt 379 ac help please
Trevor19 posted Jun 16, 2025 at 6:23 PM -
Full overhaul or partial
irishluck09 posted Jun 16, 2025 at 1:35 PM -
Cracked Drive Axle Part
sonnyca posted Jun 16, 2025 at 1:18 PM -
Mack E7 and fuller trans fit...
john510 posted Jun 16, 2025 at 9:41 AM -
1996 kenworth vent window seal
DieselFuelOnly66 posted Jun 16, 2025 at 9:33 AM -
What is this taped to my OBD...
Deezl Smoke posted Jun 15, 2025 at 9:21 PM
Loading...
Recent Threads
-
New Yorker makes six figures...
Tb0n3 posted Jun 19, 2025 at 8:22 AM -
Anyone Have Experience With...
Charmeiser posted Jun 19, 2025 at 12:59 AM -
What issues may I have?
GameOver0908 posted Jun 19, 2025 at 12:30 AM -
What advice do you have for a...
Captainmidnite51 posted Jun 18, 2025 at 11:22 PM -
worked for a company in Chicago...
driver956. posted Jun 18, 2025 at 10:56 PM -
Interested in Tanker as a temp...
Lucasmoore26 posted Jun 18, 2025 at 9:15 PM -
ICC bumper damage enough to put...
driver956. posted Jun 18, 2025 at 8:42 PM -
Easy and quick transport.
Jbashford posted Jun 18, 2025 at 7:55 PM -
Indiana approves interstate tolling
JonJon78 posted Jun 18, 2025 at 7:06 PM -
Conestoga Wrench
Arky posted Jun 18, 2025 at 6:17 PM
Loading...